Recent studies on carbohydrate compounds for corrosion inhibition: a systematic review
DOI:
https://doi.org/10.33448/rsd-v11i9.32021Keywords:
Systematic review; Biopolymers; Carbohydrates; Corrosion inhibition.Abstract
Carbohydrate biopolymers are one of the ecological alternatives to other organic corrosion inhibitors with toxic potential. In corrosion inhibition, they represent a set of chemically stable and environmentally friendly coatings for protecting metal surfaces, making them effective coatings for metal protection. Thus, this article presents a systematic review of carbohydrate biopolymers used as corrosion inhibitors since 2018. The investigation followed the PRISMA statement, which provides a meticulous summary of all available primary research in response to a research question. After including/excluding steps, forty-five studies were included in the review. The results are presented with a focus on the types of biopolymers evaluated, such as chitosan, cellulose, and gum arabic. In addition, the analyzed metals, the means used to accelerate the corrosion process, the type of inhibitor and the efficiency achieved in each study were also presented. In summary, this methodology helped to identify the main knowledge gaps in this area.
References
An, Y., Jiang, G., Ren, Y., Zhang, L., Qi, Y., & Ge, Q. (2015). An environmental friendly and biodegradable shale inhibitor based on chitosan quaternary ammonium salt. Journal of Petroleum Science and Engineering, 135, 253–260. https://doi.org/10.1016/j.petrol.2015.09.005
Ansari, K. R., Chauhan, D. S., Quraishi, M. A., Mazumder, M. A. J., & Singh, A. (2020). Chitosan Schiff base: an environmentally benign biological macromolecule as a new corrosion inhibitor for oil & gas industries. International Journal of Biological Macromolecules, 144, 305–315. https://doi.org/10.1016/j.ijbiomac.2019.12.106
Antony, R., Arun, T., & Manickam, S. T. D. (2019). A review on applications of chitosan-based Schiff bases. International Journal of Biological Macromolecules, 129, 615–633. https://doi.org/10.1016/j.ijbiomac.2019.02.047
Anush, S. M., Vishalakshi, B., Kalluraya, B., & Manju, N. (2018). Synthesis of pyrazole-based Schiff bases of Chitosan: Evaluation of antimicrobial activity. International Journal of Biological Macromolecules, 119, 446–452. https://doi.org/10.1016/j.ijbiomac.2018.07.129
Ashassi-Sorkhabi, H., & Kazempour, A. (2020). Chitosan, its derivatives and composites with superior potentials for the corrosion protection of steel alloys: A comprehensive review. Carbohydrate Polymers, 237(March), 116110. https://doi.org/10.1016/j.carbpol.2020.116110
Avérous, L., & Pollet, E. (2012). Environmental Silicate Nano-Biocomposites. Green Energy and Technology, 50. https://doi.org/10.1007/978-1-4471-4108-2
Azmana, M., Mahmood, S., Hilles, A. R., Rahman, A., Arifin, M. A. Bin, & Ahmed, S. (2021). A review on chitosan and chitosan-based bionanocomposites: Promising material for combatting global issues and its applications. In International Journal of Biological Macromolecules (Vol. 185, pp. 832–848). https://doi.org/10.1016/j.ijbiomac.2021.07.023
Bahari, H. S., Ye, F., Carrillo, E. A. T., Leliopoulos, C., Savaloni, H., & Dutta, J. (2020). Chitosan nanocomposite coatings with enhanced corrosion inhibition effects for copper. International Journal of Biological Macromolecules, 162, 1566–1577. https://doi.org/10.1016/j.ijbiomac.2020.08.035
Baran, T., & Menteş, A. (2015). Cu(II) and Pd(II) complexes of water soluble O-carboxymethyl chitosan Schiff bases: Synthesis, characterization. International Journal of Biological Macromolecules, 79, 542–554. https://doi.org/10.1016/j.ijbiomac.2015.05.021
Biswas, A., Das, D., Lgaz, H., Pal, S., & Nair, U. G. (2019). Biopolymer dextrin and poly (vinyl acetate) based graft copolymer as an efficient corrosion inhibitor for mild steel in hydrochloric acid: Electrochemical, surface morphological and theoretical studies. Journal of Molecular Liquids, 275, 867–878. https://doi.org/10.1016/j.molliq.2018.11.095
Brito, G. F., Agrawal, P., Araújo, E. M., & Mélo, T. J. A. (2011). Biopolímeros, Polímeros Biodegradáveis e Polímeros Verdes. Revista Eletrônica de Materiais e Processos, 6(2), 127–139. http://www.ncbi.nlm.nih.gov/pubmed/19998664
Carneiro, J., Tedim, J., Fernandes, S. C. M., Freire, C. S. R., Gandini, A., Ferreira, M. G. S., & Zheludkevich, M. L. (2013). Functionalized chitosan-based coatings for active corrosion protection. Surface and Coatings Technology, 226, 51–59. https://doi.org/10.1016/j.surfcoat.2013.03.035
Carneiro, J., Tedim, J., & Ferreira, M. G. S. (2015). Chitosan as a smart coating for corrosion protection of aluminum alloy 2024: A review. Progress in Organic Coatings, 89, 348–356. https://doi.org/10.1016/j.porgcoat.2015.03.008
Chai, C., Xu, Y., Shi, S., Zhao, X., Wu, Y., Xu, Y., & Zhang, L. (2018). Functional polyaspartic acid derivatives as eco-friendly corrosion inhibitors for mild steel in 0.5 M H2SO4 solution. RSC Advances, 8(44), 24970–24981. https://doi.org/10.1039/c8ra03534b
Chang, K. L. B., Tai, M. C., & Cheng, F. H. (2001). Kinetics and products of the degradation of chitosan by hydrogen peroxide. In Journal of Agricultural and Food Chemistry (Vol. 49, Issue 10, pp. 4845–4851). https://doi.org/10.1021/jf001469g
Charitha, B. P., Chenan, A., & Rao, P. (2017). Enhancement of Surface Coating Characteristics of Epoxy Resin by Dextran: An Electrochemical Approach. In Industrial and Engineering Chemistry Research (Vol. 56, Issue 5, pp. 1137–1147). https://doi.org/10.1021/acs.iecr.6b03274
Charitha, B. P., & Rao, P. (2018). Pullulan as a potent green inhibitor for corrosion mitigation of aluminum composite: Electrochemical and surface studies. International Journal of Biological Macromolecules, 112, 461–472. https://doi.org/10.1016/j.ijbiomac.2018.01.218
Chauhan, D. S., Ansari, K. R., Sorour, A. A., Quraishi, M. A., Lgaz, H., & Salghi, R. (2018). Thiosemicarbazide and thiocarbohydrazide functionalized chitosan as ecofriendly corrosion inhibitors for carbon steel in hydrochloric acid solution. International Journal of Biological Macromolecules, 107, 1747–1757. https://doi.org/10.1016/j.ijbiomac.2017.10.050
Chauhan, D. S., Mouaden, K. EL, Quraishi, M. A., & Bazzi, L. (2020). Aminotriazolethiol-functionalized chitosan as a macromolecule-based bioinspired corrosion inhibitor for surface protection of stainless steel in 3.5% NaCl. International Journal of Biological Macromolecules, 152, 234–241. https://doi.org/10.1016/j.ijbiomac.2020.02.283
Chauhan, D. S., Quraishi, M. A., & Qurashi, A. (2021). Recent trends in environmentally sustainable Sweet corrosion inhibitors. Journal of Molecular Liquids, 326, 115117. https://doi.org/10.1016/j.molliq.2020.115117
Chauhan, D. S., Quraishi, M. A., Sorour, A. A., Saha, S. K., & Banerjee, P. (2019). Triazole-modified chitosan: A biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution. RSC Advances, 9(26), 14990–15003. https://doi.org/10.1039/c9ra00986h
Cheng, S., Chen, S., Liu, T., Chang, X., & Yin, Y. (2007). Carboxymenthylchitosan as an ecofriendly inhibitor for mild steel in 1 M HCl. Materials Letters, 61(14–15), 3276–3280. https://doi.org/10.1016/j.matlet.2006.11.102
Chugh, B., Singh, A. K., Chaouiki, A., Salghi, R., Thakur, S., & Pani, B. (2020). A comprehensive study about anti-corrosion behaviour of pyrazine carbohydrazide: Gravimetric, electrochemical, surface and theoretical study. Journal of Molecular Liquids, 299, 112160. https://doi.org/10.1016/j.molliq.2019.112160
Chugh, B., Singh, A. K., Poddar, D., Thakur, S., Pani, B., & Jain, P. (2020). Relation of degree of substitution and metal protecting ability of cinnamaldehyde modified chitosan. Carbohydrate Polymers, 234, 115945. https://doi.org/10.1016/j.carbpol.2020.115945
Clavijo, S., Membrives, F., Quiroga, G., Boccaccini, A. R., & Santillán, M. J. (2016). Electrophoretic deposition of chitosan/Bioglass® and chitosan/Bioglass®/TiO2 composite coatings for bioimplants. Ceramics International, 42(12), 14206–14213. https://doi.org/10.1016/j.ceramint.2016.05.178
Clifford, A., Pang, X., & Zhitomirsky, I. (2018). Biomimetically modified chitosan for electrophoretic deposition of composites. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 544(December 2017), 28–34. https://doi.org/10.1016/j.colsurfa.2018.02.028
Cui, G., Guo, J., Zhang, Y., Zhao, Q., Fu, S., Han, T., Zhang, S., & Wu, Y. (2019). Chitosan oligosaccharide derivatives as green corrosion inhibitors for P110 steel in a carbon-dioxide-saturated chloride solution. Carbohydrate Polymers, 203, 386–395. https://doi.org/10.1016/j.carbpol.2018.09.038
Darmokoesoemo, H., Suyanto, S., Anggara, L. S., Amenaghawon, A. N., & Kusuma, H. S. (2018). Application of carboxymethyl chitosan-benzaldehyde as anticorrosion agent on steel. International Journal of Chemical Engineering, 2018. https://doi.org/10.1155/2018/4397867
Eduok, U., Ohaeri, E., & Szpunar, J. (2018). Electrochemical and surface analyses of X70 steel corrosion in simulated acid pickling medium: Effect of poly (N-vinyl imidazole) grafted carboxymethyl chitosan additive. Electrochimica Acta, 278, 302–312. https://doi.org/10.1016/j.electacta.2018.05.060
El-Sherbiny, I. M., Lins, R. J., Abdel-Bary, E. M., & Harding, D. R. K. (2005). Preparation, characterization, swelling and in vitro drug release behaviour of poly[N-acryloylglycine-chitosan] interpolymeric pH and thermally-responsive hydrogels. European Polymer Journal, 41(11), 2584–2591. https://doi.org/10.1016/j.eurpolymj.2005.05.035
EL. Mouaden, K., Chauhan, D. S., Quraishi, M. A., Bazzi, L., & Hilali, M. (2020). Cinnamaldehyde-modified chitosan as a bio-derived corrosion inhibitor for acid pickling of copper: Microwave synthesis, experimental and computational study. International Journal of Biological Macromolecules, 164, 3709–3717. https://doi.org/10.1016/j.ijbiomac.2020.08.137
El Mouaden, K., El Ibrahimi, B., Oukhrib, R., Bazzi, L., Hammouti, B., Jbara, O., Tara, A., Chauhan, D. S., & Quraishi, M. A. (2018). Chitosan polymer as a green corrosion inhibitor for copper in sulfide-containing synthetic seawater. International Journal of Biological Macromolecules, 119, 1311–1323. https://doi.org/10.1016/j.ijbiomac.2018.07.182
Fardioui, M., Rbaa, M., Benhiba, F., Galai, M., Guedira, T., Lakhrissi, B., Warad, I., & Zarrouk, A. (2021). Bio-active corrosion inhibitor based on 8-hydroxyquinoline-grafted-Alginate: Experimental and computational approaches. Journal of Molecular Liquids, 323, 114615. https://doi.org/10.1016/j.molliq.2020.114615
Farhadian, A., Assar Kashani, S., Rahimi, A., Oguzie, E. E., Javidparvar, A. A., Nwanonenyi, S. C., Yousefzadeh, S., & Nabid, M. R. (2021). Modified hydroxyethyl cellulose as a highly efficient eco-friendly inhibitor for suppression of mild steel corrosion in a 15% HCl solution at elevated temperatures. Journal of Molecular Liquids, 338, 116607. https://doi.org/10.1016/j.molliq.2021.116607
Farhadian, A., Varfolomeev, M. A., Shaabani, A., Nasiri, S., Vakhitov, I., Zaripova, Y. F., Yarkovoi, V. V., & Sukhov, A. V. (2020). Sulfonated chitosan as green and high cloud point kinetic methane hydrate and corrosion inhibitor: Experimental and theoretical studies. Carbohydrate Polymers, 236, 116035. https://doi.org/10.1016/j.carbpol.2020.116035
Figueiredo, E. P., & Meira, G. (2013). Corrosión de armadura de estructuras de hormigón. ALCONPAT Internacional - Associación Latinoamericana de Control de Calidad, Patología y Recuperación de La Construcción, 30.
Franchetti, S. M. M., & Marconato, J. C. (2006). Polímeros biodegradáveis - uma solução parcial para diminuir a quantidade dos resíduos plásticos. Química Nova, 29(4), 811–816. https://doi.org/10.1590/s0100-40422006000400031
Gebhardt, F., Seuss, S., Turhan, M. C., Hornberger, H., Virtanen, S., & Boccaccini, A. R. (2012). Characterization of electrophoretic chitosan coatings on stainless steel. Materials Letters, 66(1), 302–304. https://doi.org/10.1016/j.matlet.2011.08.088
Giuliani, C., Pascucci, M., Riccucci, C., Messina, E., Salzano de Luna, M., Lavorgna, M., Ingo, G. M., & Di Carlo, G. (2018). Chitosan-based coatings for corrosion protection of copper-based alloys: A promising more sustainable approach for cultural heritage applications. Progress in Organic Coatings, 122(April), 138–146. https://doi.org/10.1016/j.porgcoat.2018.05.002
Gupta, N. K., Joshi, P. G., Srivastava, V., & Quraishi, M. A. (2018). Chitosan: A macromolecule as green corrosion inhibitor for mild steel in sulfamic acid useful for sugar industry. International Journal of Biological Macromolecules, 106, 704–711. https://doi.org/10.1016/j.ijbiomac.2017.08.064
Hasanin, M. S., & Al Kiey, S. A. (2020). Environmentally benign corrosion inhibitors based on cellulose niacin nano-composite for corrosion of copper in sodium chloride solutions. International Journal of Biological Macromolecules, 161, 345–354. https://doi.org/10.1016/j.ijbiomac.2020.06.040
Hassan, R. M., Ibrahim, S. M., Takagi, H. D., & Sayed, S. A. (2018). Kinetics of corrosion inhibition of aluminum in acidic media by water-soluble natural polymeric chondroitin-4-sulfate as anionic polyelectrolyte inhibitor. Carbohydrate Polymers, 192, 356–363. https://doi.org/10.1016/j.carbpol.2018.03.066
Heise, S., Höhlinger, M., Hernández, Y. T., Palacio, J. J. P., Rodriquez Ortiz, J. A., Wagener, V., Virtanen, S., & Boccaccini, A. R. (2017). Electrophoretic deposition and characterization of chitosan/bioactive glass composite coatings on Mg alloy substrates. Electrochimica Acta, 232, 456–464. https://doi.org/10.1016/j.electacta.2017.02.081
Hernández-Padrón, G., Rojas, F., & Castaño, V. (2006). Development and testing of anticorrosive SiO2/phenolic-formaldehydic resin coatings. Surface and Coatings Technology, 201(3–4), 1207–1214. https://doi.org/10.1016/j.surfcoat.2006.01.070
Izadi, M., Shahrabi, T., & Ramezanzadeh, B. (2018). Active corrosion protection performance of an epoxy coating applied on the mild steel modified with an eco-friendly sol-gel film impregnated with green corrosion inhibitor loaded nanocontainers.pdf. Applied Surface Science, 491–505. https://doi.org/https://doi.org/10.1016/j.apsusc.2018.01.185
Jena, G., Anandkumar, B., Vanithakumari, S. C., George, R. P., Philip, J., & Amarendra, G. (2020). Graphene oxide-chitosan-silver composite coating on Cu-Ni alloy with enhanced anticorrosive and antibacterial properties suitable for marine applications. Progress in Organic Coatings, 139, 105444. https://doi.org/10.1016/j.porgcoat.2019.105444
Joshi, J. M., & Sinha, V. K. (2007). Ceric ammonium nitrate induced grafting of polyacrylamide onto carboxymethyl chitosan. In Carbohydrate Polymers (Vol. 67, Issue 3, pp. 427–435). https://doi.org/10.1016/j.carbpol.2006.06.021
Koch, G. (2017). Cost of corrosion. In Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-101105-8.00001-2
Kokalj, A., Behzadi, H., & Farahati, R. (2020). DFT study of aqueous-phase adsorption of cysteine and penicillamine on Fe(110): Role of bond-breaking upon adsorption. Applied Surface Science, 514(February), 145896. https://doi.org/10.1016/j.apsusc.2020.145896
Lai, X., Hu, J., Ruan, T., Zhou, J., & Qu, J. (2021). Chitosan derivative corrosion inhibitor for aluminum alloy in sodium chloride solution: A green organic/inorganic hybrid. Carbohydrate Polymers, 265, 118074. https://doi.org/10.1016/j.carbpol.2021.118074
Liu, J., Yu, Q., Yu, M., Li, S., Zhao, K., Xue, B., & Zu, H. (2018). Silane modification of titanium dioxide-decorated graphene oxide nanocomposite for enhancing anticorrosion performance of epoxy coatings on AA-2024. Journal of Alloys and Compounds, 744, 728–739. https://doi.org/10.1016/j.jallcom.2018.01.267
Luo, X., Ci, C., Li, J., Lin, K., Du, S., Zhang, H., Li, X., Cheng, Y. F., Zang, J., & Liu, Y. (2019). 4-aminoazobenzene modified natural glucomannan as a green eco-friendly inhibitor for the mild steel in 0.5 M HCl solution. Corrosion Science, 151(November 2017), 132–142. https://doi.org/10.1016/j.corsci.2019.02.027
Ma, Z., Wang, W., Wu, Y., He, Y., & Wu, T. (2014). Oxidative degradation of chitosan to the low molecular water-soluble chitosan over peroxotungstate as chemical scissors. In PLoS ONE (Vol. 9, Issue 6). https://doi.org/10.1371/journal.pone.0100743
Macedo, R. G. M. de A., Marques, N. do N., Tonholo, J., & Balaban, R. de C. (2019). Water-soluble carboxymethylchitosan used as corrosion inhibitor for carbon steel in saline medium. Carbohydrate Polymers, 205, 371–376. https://doi.org/10.1016/j.carbpol.2018.10.081
Manawi, Y., Kochkodan, V., Mohammad, A. W., & Ali Atieh, M. (2017). Arabic gum as a novel pore-forming and hydrophilic agent in polysulfone membranes. In Journal of Membrane Science (Vol. 529, pp. 95–104). https://doi.org/10.1016/j.memsci.2017.02.002
Marzorati, S., Verotta, L., & Trasatti, S. P. (2019). Green corrosion inhibitors from natural sources and biomass wastes. Molecules, 24(1). https://doi.org/10.3390/molecules24010048
Mobin, M., Basik, M., & Aslam, J. (2018). Boswellia serrata gum as highly efficient and sustainable corrosion inhibitor for low carbon steel in 1 M HCl solution: Experimental and DFT studies. Journal of Molecular Liquids, 263, 174–186. https://doi.org/10.1016/j.molliq.2018.04.150
Moher, D., Shamseer, L., Clarke, M., Ghersi, D., Liberati, A., Petticrew, M., Shekelle, P., Stewart, L. A., & Group, P. (2015). Preferred reporting items for systematic review and meta-analysis protocols ( PRISMA-P ) 2015 statement. 4(1), 1–9. https://doi.org/10.1186/2046-4053-4-1
Nadi, I., Belattmania, Z., Sabour, B., Reani, A., Sahibed-dine, A., Jama, C., & Bentiss, F. (2019). Sargassum muticum extract based on alginate biopolymer as a new efficient biological corrosion inhibitor for carbon steel in hydrochloric acid pickling environment: Gravimetric, electrochemical and surface studies. International Journal of Biological Macromolecules, 141, 137–149. https://doi.org/10.1016/j.ijbiomac.2019.08.253
Negi, H., Verma, P., & Singh, R. K. (2021). A comprehensive review on the applications of functionalized chitosan in petroleum industry. Carbohydrate Polymers, 266. https://doi.org/10.1016/j.carbpol.2021.118125
Neves, R. M., Jr, H. L. O., Zattera, A. J., & Amico, S. C. (2021). Recent studies on modified cellulose/nanocellulose epoxy composites: A systematic review. Carbohydrate Polymers, 255, 1–17.
Nikpour, S., Ramezanzadeh, M., Bahlakeh, G., Ramezanzadeh, B., & Mahdavian, M. (2019). Eriobotrya japonica Lindl leaves extract application for effective corrosion mitigation of mild steel in HCl solution: Experimental and computational studies. Construction and Building Materials, 220, 161–176. https://doi.org/10.1016/j.conbuildmat.2019.06.005
Nwanonenyi, S., Ogbobe, O., Madufor, I., & Oguzie, E. (2016). Inhibitive Performance of Hydroxypropyl Cellulose and Potassium Iodide on the Corrosion of Mild Steel in Sulphuric Acid Environment. American Chemical Science Journal, 16(2), 1–12. https://doi.org/10.9734/acsj/2016/28250
O’Connor, A., Sargeant, J., & Wood, H. (2017). Systematic reviews. Veterinary Epidemiology: Fourth Edition, 397–420. https://doi.org/10.1002/9781118280249.ch19
Olivares, O., Likhanova, N. V., Gómez, B., Navarrete, J., Llanos-Serrano, M. E., Arce, E., & Hallen, J. M. (2006). Electrochemical and XPS studies of decylamides of α-amino acids adsorption on carbon steel in acidic environment. In Applied Surface Science (Vol. 252, Issue 8, pp. 2894–2909). https://doi.org/10.1016/j.apsusc.2005.04.040
Oliveira, J. A. M., de Santana, R. A. C., & Wanderley Neto, A. de O. (2020). Characterization of the chitosan-tungsten composite coating obtained by electrophoretic deposition. Progress in Organic Coatings, 143, 105631. https://doi.org/10.1016/j.porgcoat.2020.105631
Pais, M., George, S. D., & Rao, P. (2021). Glycogen nanoparticles as a potential corrosion inhibitor. International Journal of Biological Macromolecules, 182, 2117–2129. https://doi.org/10.1016/j.ijbiomac.2021.05.185
Pais, M., & Rao, P. (2020). Maltodextrin for corrosion mitigation of zinc in sulfamic acid: Electrochemical, surface and spectroscopic studies. International Journal of Biological Macromolecules, 145, 575–585. https://doi.org/10.1016/j.ijbiomac.2019.12.197
Pakseresht, A., Alizadeh, H., Hanaei, A., Heidarshenas, B., Shahbazkhan, A., & Ahmadi, N. P. (2018). The Effect of accelerator types on the phosphate Zn-%12Ni electrodeposite coating. Material Science & Engineering International Journal, 2(6). https://doi.org/10.15406/mseij.2018.02.00062
Pourhashem, S., Vaezi, M. R., Rashidi, A., & Bagherzadeh, M. R. (2017). Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel. Corrosion Science, 115, 78–92. https://doi.org/10.1016/j.corsci.2016.11.008
Pozzo, L. de Y., Conceição, T. F. da, Spinelli, A., Scharnagl, N., & Nunes Pires, A. T. (2019). The influence of the crosslinking degree on the corrosion protection properties of chitosan coatings in simulated body fluid. Progress in Organic Coatings, 137, 105328. https://doi.org/10.1016/j.porgcoat.2019.105328
Raja, P. B., & Sethuraman, M. G. (2008). Natural products as corrosion inhibitor for metals in corrosive media - A review. Materials Letters, 62(1), 113–116. https://doi.org/10.1016/j.matlet.2007.04.079
Ramezanzadeh, B., Ghasemi, E., Mahdavian, M., Changizi, E., & Mohamadzadeh Moghadam, M. H. (2015). Covalently-grafted graphene oxide nanosheets to improve barrier and corrosion protection properties of polyurethane coatings. Carbon, 93, 555–573. https://doi.org/10.1016/j.carbon.2015.05.094
Rani, B. E. A., & Basu, B. B. J. (2012). Green inhibitors for corrosion protection of metals and alloys: An overview. International Journal of Corrosion, 2012(6), 16–25. https://doi.org/10.1155/2012/380217
Rbaa, M., Benhiba, F., Hssisou, R., Lakhrissi, Y., Lakhrissi, B., Touhami, M. E., Warad, I., & Zarrouk, A. (2021). Green synthesis of novel carbohydrate polymer chitosan oligosaccharide grafted on D-glucose derivative as bio-based corrosion inhibitor. Journal of Molecular Liquids, 322, 114549. https://doi.org/10.1016/j.molliq.2020.114549
Rbaa, M., Fardioui, M., Verma, C., Abousalem, A. S., Galai, M., Ebenso, E. E., Guedira, T., Lakhrissi, B., Warad, I., & Zarrouk, A. (2020). 8-Hydroxyquinoline based chitosan derived carbohydrate polymer as biodegradable and sustainable acid corrosion inhibitor for mild steel: Experimental and computational analyses. International Journal of Biological Macromolecules, 155, 645–655. https://doi.org/10.1016/j.ijbiomac.2020.03.200
Ribeiro, D. V., & Helene, P. (2013). Corrosão em Estruturas de Concreto: Teoria, Controle e Métodos de Análise. Elsevier, 1, 240 p. https://barnard.edu/sites/default/files/inline/student_user_guide_for_spss.pdf%0Ahttp://www.ibm.com/support%0Ahttp://www.spss.com/sites/dm-book/legacy/ProgDataMgmt_SPSS17.pdf%0Ahttps://www.neps-data.de/Portals/0/Working Papers/WP_XLV.pdf%0Ahttp://www2.psy
Sambyal, P., Ruhi, G., Dhawan, S. K., Bisht, B. M. S., & Gairola, S. P. (2018). Enhanced anticorrosive properties of tailored poly(aniline-anisidine)/chitosan/SiO2 composite for protection of mild steel in aggressive marine conditions. Progress in Organic Coatings, 119, 203–213. https://doi.org/10.1016/j.porgcoat.2018.02.014
Sangeetha, Y., Meenakshi, S., & SairamSundaram, C. (2015). Corrosion mitigation of N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride as inhibitor on mild steel. International Journal of Biological Macromolecules, 72, 1244–1249. https://doi.org/10.1016/j.ijbiomac.2014.10.044
Sharma, S. K., Peter, A., & Obot, I. B. (2015). Potential of Azadirachta indica as a green corrosion inhibitor against mild steel, aluminum, and tin: a review. Journal of Analytical Science and Technology, 6(1). https://doi.org/10.1186/s40543-015-0067-0
Shen, C., Alvarez, V., Koenig, J. D. B., & Luo, J. L. (2019). Gum Arabic as corrosion inhibitor in the oil industry: experimental and theoretical studies. Corrosion Engineering Science and Technology, 54(5), 444–454. https://doi.org/10.1080/1478422X.2019.1613780
Singh, P., Chauhan, D. S., Chauhan, S. S., Singh, G., & Quraishi, M. A. (2019). Chemically modified expired Dapsone drug as environmentally benign corrosion inhibitor for mild steel in sulphuric acid useful for industrial pickling process. Journal of Molecular Liquids, 286, 110903. https://doi.org/10.1016/j.molliq.2019.110903
Skale, S., Doleček, V., & Slemnik, M. (2007). Substitution of the constant phase element by Warburg impedance for protective coatings. Corrosion Science, 49(3), 1045–1055. https://doi.org/10.1016/j.corsci.2006.06.027
Solomon, M. M., Gerengi, H., Umoren, S. A., Essien, N. B., Essien, U. B., & Kaya, E. (2018). Gum Arabic-silver nanoparticles composite as a green anticorrosive formulation for steel corrosion in strong acid media. Carbohydrate Polymers, 181, 43–55. https://doi.org/10.1016/j.carbpol.2017.10.051
Solomon, M. M., Umoren, S. A., Obot, I. B., Sorour, A. A., & Gerengi, H. (2018). Exploration of Dextran for Application as Corrosion Inhibitor for Steel in Strong Acid Environment: Effect of Molecular Weight, Modification, and Temperature on Efficiency. ACS Applied Materials and Interfaces, 10(33), 28112–28129. https://doi.org/10.1021/acsami.8b09487
Solomon, M. M., Umoren, S. A., Udosoro, I. I., & Udoh, A. P. (2010). Inhibitive and adsorption behaviour of carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution. Corrosion Science, 52(4), 1317–1325. https://doi.org/10.1016/j.corsci.2009.11.041
Sørbotten, A., Horn, S. J., Eijsink, V. G. H., & Vårum, K. M. (2005). Degradation of chitosans with chitinase B from Serratia marcescens. In FEBS Journal (Vol. 272, Issue 2, pp. 538–549). https://doi.org/10.1111/j.1742-4658.2004.04495.x
Srivastava, M., Srivastava, S. K., Nikhil, Ji, G., & Prakash, R. (2019). Chitosan based new nanocomposites for corrosion protection of mild steel in aggressive chloride media. International Journal of Biological Macromolecules, 140, 177–187. https://doi.org/10.1016/j.ijbiomac.2019.08.073
Tang, G., Ren, T., Yan, Z., Ma, L., Hou, X., & Huang, X. (2020). Preparation and anticorrosion resistance of a self-curing epoxy nanocomposite coating based on mesoporous silica nanoparticles loaded with perfluorooctyl triethoxysilane. Journal of Applied Polymer Science, 137(36), 1–11. https://doi.org/10.1002/app.49072
Tran, V. T., Lee, D. K., Kim, J., Jeong, K. J., Kim, C. S., & Lee, J. (2020). Magnetic Layer-by-Layer Assembly: From Linear Plasmonic Polymers to Oligomers. ACS Applied Materials and Interfaces, 12(14), 16584–16591. https://doi.org/10.1021/acsami.9b22684
Umoren, S. A., AlAhmary, A. A., Gasem, Z. M., & Solomon, M. M. (2018a). Evaluation of chitosan and carboxymethyl cellulose as ecofriendly corrosion inhibitors for steel. International Journal of Biological Macromolecules, 117, 1017–1028. https://doi.org/10.1016/j.ijbiomac.2018.06.014
Umoren, S. A., AlAhmary, A. A., Gasem, Z. M., & Solomon, M. M. (2018b). Evaluation of chitosan and carboxymethyl cellulose as ecofriendly corrosion inhibitors for steel. International Journal of Biological Macromolecules, 117, 1017–1028. https://doi.org/10.1016/j.ijbiomac.2018.06.014
Umoren, S. A., & Eduok, U. M. (2016). Application of carbohydrate polymers as corrosion inhibitors for metal substrates in different media: A review. Carbohydrate Polymers, 140, 314–341. https://doi.org/10.1016/j.carbpol.2015.12.038
Umoren, S. A., Solomon, M. M., Madhankumar, A., & Obot, I. B. (2020). Exploration of natural polymers for use as green corrosion inhibitors for AZ31 magnesium alloy in saline environment. Carbohydrate Polymers, 230, 115466. https://doi.org/10.1016/j.carbpol.2019.115466
Urra Medina, E., & Barría Pailaquilén, R. M. (2010). Systematic Reviews and Meta-analysis: Understanding the Best Evidence in Primary Healthcare. Revista Latino-Americana de Enfermagem, 18(4), 824–831. http://www.scielo.br/scielo.php?script=sci_arttext&pid=S0104-11692010000400023&lng=en&nrm=iso&tlng=en%5Cnhttp://www.ncbi.nlm.nih.gov/pubmed/20922332
Verma, C., & Quraishi, M. A. (2021). Gum Arabic as an environmentally sustainable polymeric anticorrosive material: Recent progresses and future opportunities. International Journal of Biological Macromolecules, 184(April), 118–134. https://doi.org/10.1016/j.ijbiomac.2021.06.050
Vitório, J. A. P. (2003). Fundamentos da patologia das estruturas nas perícias de engenharia. Instituto Pernambucano de Avaliações e Perícias de Engenharia, 58. http://www.vitorioemelo.com.br/publicacoes/Fundamentos_Patologia_Estruturas_Pericias_Engenharia.pdf
Wei, H., Heidarshenas, B., Zhou, L., Hussain, G., Li, Q., & Ostrikov, K. (Ken). (2020). Green inhibitors for steel corrosion in acidic environment: state of art. Materials Today Sustainability, 10, 100044. https://doi.org/10.1016/j.mtsust.2020.100044
Wolynec, S. (2003). Técnicas Eletroquimicas de corrosão (EdUSP (ed.); 1a).
Yang, F., Liu, Y., Liu, T., Liu, S., & Zhao, H. (2019). Aniline trimer-including carboxymethylated β-cyclodextrin as an efficient corrosion inhibitor for Q235 carbon steel in 1 M HCl solution. RSC Advances, 9(52), 30249–30258. https://doi.org/10.1039/c9ra04047a
Zhang, K., Yang, W., Xu, B., Chen, Y., Yin, X., Liu, Y., & Zuo, H. (2018). Inhibitory effect of konjac glucomanan on pitting corrosion of AA5052 aluminium alloy in NaCl solution. Journal of Colloid and Interface Science, 517, 52–60. https://doi.org/10.1016/j.jcis.2018.01.092
Zhang, K., Yang, W., Yin, X., Chen, Y., Liu, Y., Le, J., & Xu, B. (2018). Amino acids modified konjac glucomannan as green corrosion inhibitors for mild steel in HCl solution. Carbohydrate Polymers, 181, 191–199. https://doi.org/10.1016/j.carbpol.2017.10.069
Zhang, Q. H., Hou, B. S., Li, Y. Y., Zhu, G. Y., Lei, Y., Wang, X., Liu, H. F., & Zhang, G. A. (2021). Dextran derivatives as highly efficient green corrosion inhibitors for carbon steel in CO2-saturated oilfield produced water: Experimental and theoretical approaches. Chemical Engineering Journal, 424, 130519. https://doi.org/10.1016/j.cej.2021.130519
Zhang, W., Li, H. J., Chen, L., Zhang, S., Ma, Y., Ye, C., Zhou, Y., Pang, B., & Wu, Y. C. (2020). Fructan from Polygonatum cyrtonema Hua as an eco-friendly corrosion inhibitor for mild steel in HCl media. Carbohydrate Polymers, 238, 116216. https://doi.org/10.1016/j.carbpol.2020.116216
Zhang, W., Nie, B., Li, H. J., Li, Q., Li, C., & Wu, Y. C. (2021). Inhibition of mild steel corrosion in 1 M HCl by chondroitin sulfate and its synergistic effect with sodium alginate. Carbohydrate Polymers, 260, 117842. https://doi.org/10.1016/j.carbpol.2021.117842
Zhang, W., Wu, Y. C., & Li, H. J. (2021). Apostichopus japonicus polysaccharide as efficient sustainable inhibitor for mild steel against hydrochloric acid corrosion. Journal of Molecular Liquids, 321, 114923. https://doi.org/10.1016/j.molliq.2020.114923
Zhao, Q., Guo, J., Cui, G., Han, T., & Wu, Y. (2020). Chitosan derivatives as green corrosion inhibitors for P110 steel in a carbon dioxide environment. Colloids and Surfaces B: Biointerfaces, 194, 111150. https://doi.org/10.1016/j.colsurfb.2020.111150
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Maria Carolina de Paula Estevam D'Oliveira; Emerson Adriano Guarda; Patrícia Martins Guarda; Salmo Moreira Sidel
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.