Use of smart edible topping based on whey and jaboticaba rind extract in cheese plate
DOI:
https://doi.org/10.33448/rsd-v9i5.3346Keywords:
Bioactivity; Active and intelligent packaging; Biofilm.Abstract
The objective was to develop an edible coating, in the form of cylindrical ribbons, to be added in packages of Prato cheeses, using constant concentrations of whey and increasing extracts of jaboticaba peel. For this, anthocyanic compounds present in the bark of the fruit were extracted in cold solution. Subsequently, three different concentrations of this extract were transferred to the filmogenic solutions containing whey, cassava starch and glycerol. For greenhouse drying, the solutions were placed in Petry Acrylic plates and waited within 32 hours. After this process, the edible coatings were applied in Prato cheese and analyzed in five time intervals: 0, 15, 30, 45 and 60 days. During this period, changes in color and pH patterns were observed. The active and intelligent edible coatings modified the color along with the pH change from the first 15 days of analysis. This change gave the coating bioactivity.
References
Almeida, K. E., Bonassi, I. A. & Roça, R. O. (2001). Características físicas e químicas de bebidas lácteas fermentadas e preparadas com soro de queijo minas frescal. Ciência e Tecnologia de Alimentos, 21(2):187-192
Ashley, R. J. (1985). Permeabilidade e embalagem plástica. Em: Comyn J, editor. Permeabilidade do polímero. Londres: Elsevier Applied Science Publishers.
Association of Official Agricultural Chemists. Official methods of the Association of the Agricultural Chemists 16. ed. Washington, DC, v. 2, pg 1094, 1995.
Batista, E. O. (2004). Sistema de Informação: o uso consciente da tecnologia para o gerenciamento. São Paulo: Saraiva.
Bertuzzi, M. A., Armada, M. & Gottifredi, J. C. (2007). Physicochemical characterization of starch-based films. Journal of Food Engineering, 82(1):17-25.
BRASIL. Ministério da Agricultura, Pecuária e Abastecimento. Instrução Normativa nº 68, de 12 de dezembro de 2006. Métodos analíticos oficiais físico-químicos para controle de leite e produtos lácteos (revoga Instrução Normativa nº 22, de 14 de abril de 2003). Diário Oficial da União, Brasília, 14 de dezembro 2006, Seção 1, Página 8, 2006.
Brouillard, R. & Dubois, JE (1977). Mecanismo das transformações estruturais de antocianinas em meios ácidos. Jornal da Sociedade Americana de Química , 99 (5), 1359-1364.
Cassetari, L. D. (2012). Teores de clorofila e β-caroteno em cultivares e linharesalface. 67p. Dissertação (mestrado). Universidade Federal de Lavras.
Fakhouri, F. M., & Collares, F. P. (2006). Impact of drying conditions on the properties of biofilms based on gelatin and different types of corn and manioc starch. In CONGRESSO IDS.
Fang, Y., Al-Assaf, S., Phillips, G. O., Nishinari, K., Funami, T., & Williams, P. A. (2008). Binding behavior of calcium to polyuronates: comparison of pectin with alginate. Carbohydrate Polymers, 72(2), 334-341.
Ferreira, D. F. (2011). Sisvar: a computer statistical analysis system. Ciência e agrotecnologia, 35(6), 1039-1042.
Fossen, T., Cabrita, L., & Andersen, O. M. (1998). Colour and stability of pure anthocyanins influenced by pH including the alkaline region. Food Chemistry, 63(4), 435-440.
Furtado, M. M., & Lourenço Neto, J. D. M. (1994). Tecnologia de queijos: manual técnico para a produção industrial de queijos. São Paulo: Dipemar, 118, 81.
de Graaf, R. A., Karman, A. P., & Janssen, L. P. (2003). Material properties and glass transition temperatures of different thermoplastic starches after extrusion processing. Starch‐Stärke, 55(2), 80-86.
He, F., Um, L., G-Liang Yan., Na-Na, L., Qiu-Hong, P., Wang, J., Reeves, M. J., Chang-Qing, D. (2015). Molecules, 15, 9057-9091.
Heins, A. (2001). Projetando composição de alimentos à medida de antocianinas. Em: Phytoquímicos Biologicamente Ativos em Alimentos: Análise, Metabolismo, Biodisponibilidade e Função, Pfannhauser, W., GR Fenwick e S. Khokhar (Eds.).Royal Society of Chemistry, 378-381.
Hong, S. I., & Park, W. S. (2000). Use of color indicators as an active packaging system for evaluating kimchi fermentation. Journal of Food Engineering, 46(1), 67-72.
Jacobs, J. A., Kilduff, T. F. (2005). Engineering Materials Technology, 5th edition, Prentice Hall PTR, Paramus, NJ.
Kong, J. M., Chia, L. S., Goh, N. K., Chia, T. F., & Brouillard, R. (2003). Analysis and biological activities of anthocyanins. Phytochemistry, 64(5), 923-933.
Labuza, T. P. (1984). Determinação de isotermas de sorção de umidade. Em: Sorção de umidade: Aspectos práticos da medição e uso da isoterma. St. Paul, MN: Associação Americana de Químicos de Cereais, 64-73.
Lopes, J., Ribeyre, C., & Nicolas, A. (2006). Complex minisatellite rearrangements generated in the total or partial absence of Rad27/hFEN1 activity occur in a single generation and are Rad51 and Rad52 dependent. Molecular and cellular biology, 26(17), 6675-6689.
Mali, S., Grossmann, M. V. E., García, M. A., Martino, M. N., & Zaritzky, N. E. (2006). Effects of controlled storage on thermal, mechanical and barrier properties of plasticized films from different starch sources. Journal of Food Engineering, 75(4), 453-460.
Mizubuti, I. Y., Ribeiro, E. L. D. A., Rocha, M. A. D., Silva, L. D. D. F. D., Pinto, A. P., Fernandes, W. C., & Rolim, M. A. (2002). Consumo e digestibilidade aparente das silagens de milho (Zea mays L.), sorgo (Sorghum bicolor (L.) Moench) e girassol (Helianthus annuus L.). Revista Brasileira de Zootecnia, 31(1), 267-272.
Morales, P., Barros, L., Dias, M. I., Santos-Buelga, C., Ferreira, I. C., Asquieri, E. R., & Berrios, J. D. J. (2016). Non-fermented and fermented jabuticaba (Myrciaria cauliflora Mart.) pomaces as valuable sources of functional ingredients. Food chemistry, 208, 220-227.
Osés, J., Fabregat-Vázquez, M., Pedroza-Islas, R., Tomás, S. A., Cruz-Orea, A., & Maté, J. I. (2009). Development and characterization of composite edible films based on whey protein isolate and mesquite gum. Journal of Food Engineering, 92(1), 56-62.
Pacquit, A., Frisby, J., Diamond, D., Lau, K. T., Farrell, A., Quilty, B., & Diamond, D. (2007). Development of a smart packaging for the monitoring of fish spoilage. Food chemistry, 102(2), 466-470.
Peixoto, F. M., Fernandes, I., Gouvêa, A. C. M., Santiago, M. C., Borguini, R. G., Mateus, N., ... & Ferreira, I. M. (2016). Simulation of in vitro digestion coupled to gastric and intestinal transport models to estimate absorption of anthocyanins from peel powder of jabuticaba, jamelão and jambo fruits. Journal of functional foods, 24, 373-381.
Pereira, A.S. et al. (2018). Metodologia da pesquisa científica. [e-book]. Santa Maria. Ed. UAB/NTE/UFSM. Disponível em: https://repositorio.ufsm.br/bitstream/handle/1/15824/Lic_Computacao_Metodologia-Pesquisa-Cientifica.pdf?sequence=1 . Acesso em: 28 março 2020.
Stading, M., Hermansson, A. M., & Gatenholm, P. (1998). Structure, mechanical and barrier properties of amylose and amylopectin films. Carbohydrate Polymers, 36(2-3), 217-224.
Rodrigues, S., Fernandes, F. A., de Brito, E. S., Sousa, A. D., & Narain, N. (2015). Ultrasound extraction of phenolics and anthocyanins from jabuticaba peel. Industrial Crops and Products, 69, 400-407.
Rooney, M. L. (1995). Active packaging in polymer films. In Active food packaging (pp. 74-110). Springer, Boston, MA.
Scannell, A. G., Hill, C., Ross, R. P., Marx, S., Hartmeier, W., & Arendt, E. K. (2000). Development of bioactive food packaging materials using immobilised bacteriocins Lacticin 3147 and Nisaplin®. International journal of food microbiology, 60(2-3), 241-249.
Talja, R. A., Helén, H., Roos, Y. H., & Jouppila, K. (2008). Effect of type and content of binary polyol mixtures on physical and mechanical properties of starch-based edible films. Carbohydrate Polymers, 71(2), 269-276.
Tang, X., Alavi, S., & Herald, T. J. (2008). Effects of plasticizers on the structure and properties of starch–clay nanocomposite films. Carbohydrate Polymers, 74(3), 552-558.
Teixeira, E. D. M. (2007). Utilização de amido de mandioca na preparação de novos materiais termoplásticos (Doctoral dissertation, Universidade de São Paulo).
Wurlitzer, N. J. (2007). Desenvolvimento e avaliação de propriedades físicas e antimicrobianas de filmes de poli (cloreto de vinilideno) incorporados com triclosan.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
