Hybrid layer quality of universal adhesives: a systematic literature review
DOI:
https://doi.org/10.33448/rsd-v12i5.41489Keywords:
Dentin-bonding agents; Hybrid layer; Confocal laser scanning microscopy.Abstract
Currently, the availability of a wide variety of universal adhesives makes it difficult for clinicians to choose the correct system for different bonding situations to the dentin substrate. This work presents a systematic review that evaluated the quality of the hybrid layer created by different application strategies of universal adhesive systems, in both self-etching and etching-and-rinsing modes, with the aim of investigating whether the differences observed in the hybrid layer are significant for clinical practice. Two reviewers conducted a bibliographic search until December 2022 in the PubMed (MedLine) electronic database. Only in vitro studies that evaluated the quality of the hybrid layer using confocal laser scanning microscopy and that reported the effect of using universal adhesives on the quality of the dentin hybrid layer were included. It was found that the application mode of universal adhesives influences the quality of the hybrid layer. Adhesives applied in etching-and-rinsing mode present a thicker hybrid layer with greater extensions in dentinal tubules. However, self-etching adhesives demonstrate greater longevity due to their resin-dentin interface being more resistant to aging and studies show that an etching approach prior to adhesive system application does not improve bond strength. Based on these results, we can conclude that the self-etching approach is the most advantageous option for application in dentin, as it provides greater longevity and less possibility of nanoleakage and degradation of the hybrid layer with aging.
References
Bacelar-Sá, R., Sauro, S., Abuna, G., Vitti, R., Nikaido, T., Tagami, J., Ambrosano, G. M. B., & Giannini, M. (2017). Adhesion evaluation of dentin sealing, micropermeability, and bond strength of current HEMA-free adhesives to dentin. The Journal of Adhesive Dentistry, 19(4), 357–364. https://doi.org/10.3290/j.jad.a38866.
Bakry, A. S., & Abbassy, M. A. (2021). Application modes affect two universal adhesive system's nanoleakage expression and shear bond strength. BioMed Research International, 7375779. https://doi.org/10.1155/2021/7375779.
Breschi, L., Maravic, T., Cunha, S. R., Comba, A., Cadenaro, M., Tjäderhane, L., Pashley, D. H., Tay, F. R., & Mazzoni, A. (2018). Dentin bonding systems: From dentin collagen structure to bond preservation and clinical applications. Dental Materials: Official publication of the Academy of Dental Materials, 34(1), 78–96. https://doi.org/10.1016/j.dental.2017.11.005.
Cadenaro, M., Maravic, T., Comba, A., Mazzoni, A., Fanfoni, L., Hilton, T., Ferracane, J., & Breschi, L. (2019). The role of polymerization in adhesive dentistry. Dental Materials: Official publication of the Academy of Dental Materials, 35(1), e1–e22. https://doi.org/10.1016/j.dental.2018.11.012.
Cardoso, G. C., Nakanishi, L., Isolan, C. P., Jardim, P. D. S., & Moraes, R. R. (2019). Bond stability of universal adhesives applied to dentin using etch-and-rinse or self-etch strategies. Brazilian Dental Journal, 30(5), 467–475. https://doi.org/10.1590/0103-6440201902578.
Chen, C., Niu, L. N., Xie, H., Zhang, Z. Y., Zhou, L. Q., Jiao, K., Chen, J. H., Pashley, D. H., & Tay, F. R. (2015). Bonding of universal adhesives to dentine--Old wine in new bottles? Journal of Dentistry, 43(5), 525–536. https://doi.org/10.1016/j.jdent.2015.03.004.
Choi, A. N., Lee, J. H., Son, S. A., Jung, K. H., Kwon, Y. H., & Park, J. K. (2017). Effect of dentin wetness on the bond strength of universal adhesives. Materials (Basel, Switzerland), 10(11), 1224. https://doi.org/10.3390/ma10111224.
Cuevas-Suárez, C. E., da Rosa, W. L. O., Lund, R. G., da Silva, A. F., & Piva, E. (2019). Bonding performance of universal adhesives: an updated systematic review and meta-analysis. The Journal of Adhesive Dentistry, 21(1), 7–26. https://doi.org/10.3290/j.jad.a41975.
Da Rosa, W. L., Piva, E., & Silva, A. F. (2015). Bond strength of universal adhesives: A systematic review and meta-analysis. Journal of Dentistry, 43(7), 765–776. https://doi.org/10.1016/j.jdent.2015.04.003.
Feitosa, V. P., Sauro, S., Ogliari, F. A., Stansbury, J. W., Carpenter, G. H., Watson, T. F., Sinhoreti, M. A., & Correr, A. B. (2014). The role of spacer carbon chain in acidic functional monomers on the physicochemical properties of self-etch dental adhesives. Journal of Dentistry, 42(5), 565–574. https://doi.org/10.1016/j.jdent.2014.02.009.
Feitosa, V. P., Sauro, S., Zenobi, W., Silva, J. C., Abuna, G., Van Meerbeek, B., Sinhoreti, M. A. C., Correr, A. B., & Yoshihara, K. (2019). Degradation of adhesive-dentin interfaces created using different bonding strategies after five-year simulated pulpal pressure. The Journal of Adhesive Dentistry, 21(3), 199–207. https://doi.org/10.3290/j.jad.a42510.
Frassetto, A., Breschi, L., Turco, G., Marchesi, G., Di Lenarda, R., Tay, F. R., Pashley, D. H., & Cadenaro, M. (2016). Mechanisms of degradation of the hybrid layer in adhesive dentistry and therapeutic agents to improve bond durability - A literature review. Dental Materials: Official publication of the Academy of Dental Materials, 32(2), e41–e53. https://doi.org/10.1016/j.dental.2015.11.007.
Gutiérrez, M. F., Alegría-Acevedo, L. F., Méndez-Bauer, L., Bermudez, J., Dávila-Sánchez, A., Buvinic, S., Hernández-Moya, N., Reis, A., Loguercio, A. D., Farago, P. V., Martin, J., & Fernández, E. (2019). Biological, mechanical and adhesive properties of universal adhesives containing zinc and copper nanoparticles. Journal of Dentistry, 82, 45–55. https://doi.org/10.1016/j.jdent.2019.01.012.
Hamdy T. M. (2017). Interfacial microscopic examination and chemical analysis of resin-dentin interface of self-adhering flowable resin composite. F1000 Research, 6, 1688. https://doi.org/10.12688/f1000research.12306.4.
Hardan, L., Bourgi, R., Kharouf, N., Mancino, D., Zarow, M., Jakubowicz, N., Haikel, Y., & Cuevas-Suárez, C. E. (2021). Bond strength of universal adhesives to dentin: a systematic review and meta-analysis. Polymers, 13(5), 814. https://doi.org/10.3390/polym13050814.
Hashimoto, M., Ohno, H., Sano, H., Kaga, M., & Oguchi, H. (2003). In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy. Biomaterials, 24(21), 3795–3803. https://doi.org/10.1016/s0142-9612(03)00262-x.
Jacker-Guhr, S., Sander, J., & Luehrs, A. K. (2019). How "universal" is adhesion? Shear bond strength of multi-mode adhesives to enamel and dentin. The Journal of Adhesive Dentistry, 21(1), 87–95. https://doi.org/10.3290/j.jad.a41974.
Kanniappan, G., Hari, P., & Jujare, R. H. (2022). Comparative evaluation of resin dentin interface using universal and total- etch adhesive systems on sound and eroded dentin: in vitro study. European Journal of Dentistry, 16(1), 153–160. https://doi.org/10.1055/s-0041-1734469.
Lawson, N. C., Robles, A., Fu, C. C., Lin, C. P., Sawlani, K., & Burgess, J. O. (2015). Two-year clinical trial of a universal adhesive in total-etch and self-etch mode in non-carious cervical lesions. Journal of Dentistry, 43(10), 1229–1234. https://doi.org/10.1016/j.jdent.2015.07.009.
Leite, M. L. A. E. S., Costa, C. A. S., Duarte, R. M., Andrade, A. K. M., & Soares, D. G. (2018). Bond strength and cytotoxicity of a universal adhesive according to the hybridization strategies to dentin. Brazilian Dental Journal, 29(1), 68–75. https://doi.org/10.1590/0103-6440201801698.
Maciel Pires, P., Dávila-Sánchez, A., Faus-Matoses, V., Nuñez Martí, J. M., Lo Muzio, L., & Sauro, S. (2022). Bonding performance and ultramorphology of the resin-dentine interface of contemporary universal adhesives. Clinical oral investigations, 26(6), 4391–4405. https://doi.org/10.1007/s00784-022-04402-3.
Marigo, L., Lajolo, C., Castagnola, R., Angerame, D., & Somma, F. (2012). Morphological confocal laser scanning microscope evaluation of four different "etch and rinse" adhesives in post endodontic restoration. Dental Materials Journal, 31(6), 988–994. https://doi.org/10.4012/dmj.2012-022
Meng, Y., Huang, F., Wang, S., Li, M., Lu, Y., Pei, D., & Li, A. (2021). Bonding performance of universal adhesives applied to nano-hydroxyapatite desensitized dentin using etch-and-rinse or self-etch mode. Materials (Basel, Switzerland), 14(16), 4746. https://doi.org/10.3390/ma14164746.
Muñoz, M. A., Luque-Martinez, I., Malaquias, P., Hass, V., Reis, A., Campanha, N. H., & Loguercio, A. D. (2015). In vitro longevity of bonding properties of universal adhesives to dentin. Operative Dentistry, 40(3), 282–292. https://doi.org/10.2341/14-055-L.
Oz, F. D., Ergin, E., & Canatan, S. (2019). Twenty-four-month clinical performance of different universal adhesives in etch-and-rinse, selective etching and self-etch application modes in NCCL - a randomized controlled clinical trial. Journal of Applied Oral Science: Revista FOB, 27, e20180358. https://doi.org/10.1590/1678-7757-2018-0358.
Ramya, M.K., Nayak, M., Prasada, K., Nair, S.V., Greeshma Florence Norohna, G.F., & Nambiar, J.M. (2015). Evaluation of resin dentin interface of a self-etch adhesive in comparison with a total etch adhesive using confocal microscopy. Journal of International Oral Health, 7(11), 24-27.
Saikaew, P., Matsumoto, M., Chowdhury, A., Carvalho, R. M., & Sano, H. (2018). Does shortened application time affect long-term bond strength of universal adhesives to dentin? Operative Dentistry, 43(5), 549–558. https://doi.org/10.2341/17-205-L.
Stape, T. H. S., Viita-Aho, T., Sezinando, A., Seseogullari-Dirihan, R., Eleftheriadi, E., Mutluay, M., & Tezvergil-Mutluay, A. (2022). To etch or not to etch, part II: on the hydrophobic-rich content and fatigue strength of universal adhesives. Dental Materials: Official publication of the Academy of Dental Materials, 38(8), 1419–1431. https://doi.org/10.1016/j.dental.2022.06.031
Stape, T. H. S., Viita-Aho, T., Sezinando, A., Wik, P., Mutluay, M., & Tezvergil-Mutluay, A. (2021). To etch or not to etch, part I: on the fatigue strength and dentin bonding performance of universal adhesives. Dental Materials: Official publication of the Academy of Dental Materials, 37(6), 949–960. https://doi.org/10.1016/j.dental.2021.02.016.
Thanatvarakorn, O., Prasansuttiporn, T., Takahashi, M., Thittaweerat, S., Foxton, R. M., Ichinose, S., Tagami, J., & Nakajima, M. (2016). Effect of scrubbing technique with mild self-etching adhesives on dentin bond strengths and nanoleakage expression. The Journal of Adhesive Dentistry, 18(3), 197–204. https://doi.org/10.3290/j.jad.a36033.
Usha, H., Kumari, A., Mehta, D., Kaiwar, A., & Jain, N. (2011). Comparing microleakage and layering methods of silorane-based resin composite in class V cavities using confocal microscopy: An in vitro study. Journal of Conservative Dentistry: JCD, 14(2), 164–168. https://doi.org/10.4103/0972-0707.82624.
Van Meerbeek, B., Yoshihara, K., Van Landuyt, K., Yoshida, Y., & Peumans, M. (2020). From Buonocore's Pioneering Acid-Etch Technique to Self-Adhering Restoratives. A Status Perspective of Rapidly Advancing Dental Adhesive Technology. The Journal of Adhesive Dentistry, 22(1), 7–34. https://doi.org/10.3290/j.jad.a43994.
Wagner, A., Wendler, M., Petschelt, A., Belli, R., & Lohbauer, U. (2014). Bonding performance of universal adhesives in different etching modes. Journal of Dentistry, 42(7), 800–807. https://doi.org/10.1016/j.jdent.2014.04.012.
Zhang, Z. Y., Tian, F. C., Niu, L. N., Ochala, K., Chen, C., Fu, B. P., Wang, X. Y., Pashley, D. H., & Tay, F. R. (2016). Defying ageing: an expectation for dentine bonding with universal adhesives? Journal of Dentistry, 45, 43–52. https://doi.org/10.1016/j.jdent.2015.11.008.
Zhang, Z., Beitzel, D., Mutluay, M., Tay, F. R., Pashley, D. H., & Arola, D. (2015). On the durability of resin-dentin bonds: identifying the weakest links. Dental Materials: Official publication of the Academy of Dental Materials, 31(9), 1109–1118. https://doi.org/10.1016/j.dental.2015.06.011
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Marlon Rosin; Veridiana Camilotti; Márcio José Mendonça; Julio Katuhide Ueda
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
