The use of the Khoury technique for vertical augmentation of atrophic alveolar ridges: A systematic review
DOI:
https://doi.org/10.33448/rsd-v13i8.46383Keywords:
Sobrevivência de enxerto; Perda de osso alveolar; Reabsorção óssea; Graft surviva.Abstract
One of the most important factors to be considered in rehabilitation with implants is the quantity and quality of bone available to perform the surgery, primary stability of the implant and its long-term maintenance. Different techniques for increasing bone thickness and height have been developed, determining which technique to use depends directly on some factors, including the extent and location of the bone defect. One of the techniques that has been widely discussed is the Khoury technique or Split Bone Block (SBB) technique, which proposes the fixation of thinner autogenous bone blocks, in the form of bone sheets, associated with filling with particulate bone and tunneled access. Many studies have demonstrated good results related to this type of technique, presenting satisfactory gains in bone height, favorable for success of the treatment. Thus, the objective of the present study was to review the concepts regarding vertical bone reconstructions and bring the main aspects and results related to the Khoury technique. The aim is to provide a better scientific basis for the implant dentist when selecting this technique. To this end, a systematic review was carried out where the results showed that the Khoury technique presents itself as an excellent alternative for vertical bone gains, being indicated for vertical gains prior to dental implant surgery.
References
Cawood, J. I., Howell, R. A. (1988). A classification of the edentulous jaws. Int J Oral Maxillofac Surg. Revista Internacional de Cirurgia Oral e Maxilofacial; 17(3), 232-6.
De Stavola, L., Tunkel, J. (2013). Results of vertical bone augmentation with autogenous bone block grafts and the tunnel technique: a clinical prospective study of 10 consecutively treated patients. Int J Periodontics Restorative Dent. 33(5), 651-9. 10.11607/prd.0932.
Dorosz, N., Dominiak, M. (2018). Mandibular ridge reconstruction: A review of contemporary methods. Adv Clin Exp Med. 27(8), 1159-1168. 10.17219/acem/74054.
Faverani, L. P., Ramalho-Ferreira, G., Santos, P. H., Rocha, E. P., Garcia Júnior, I. R., Pastori, C. M., Assunção, W. G. (2014). Surgical techniques for maxillart bone grafting – literature review. Rev Col Bras Cir. 41(1). http://www.scielo.br/rcbc
Groisman, M., Vidigal-Jr, G. M. (2005). Tipos de superfícies de implantes.. In: Sobrape. (Org.). Periodontia e Implantodontia - Atuação clínica baseada em evidências científicas. Sobrape. 14, 1-14.
Khoury, F., & 7Hanser, T. (2019). Three-Dimensional Vertical Alveolar Ridge Augmentation in the Posterior Maxilla: A 10-year Clinical Study. Int J Oral Maxillofac Implants. 34(2), 471-480..11607/jomi.6869.
Khoury, F., & Happe, A. (1999). Zur diagnostique und methodik von intraoralen knochenentnahmen [in German]. Z Zahnarztl Implantol 1999; 15: 167-176
Kuabara, M. R., Vasconcelos, L. W., & Carvalho, P. S. P. (2000) Técnicas cirúrgicas para obtenção de enxerto ósseo autógeno. Rev Fac Odontol Lins. 12(1/2), 44-51.
Lacerda, J. D. (2014). Uso do homoenxerto na implantodontia: revisão da literatura. 29 f. Monografia (Especialista em Cirurgia e Traumatologia buco-maxilofacial) – Faculdade de Odontologia da Universidade Federal de Minas Gerais, Belo Horizonte, 2014.
Magini, R. S. (2006). Enxertos ósseos no seio maxilar. Estética e função. São Paulo: Santos. Técnicas cirúrgicas para a enxertia óssea dos maxilares – revisão da literatura. Revista do Colégio Brasileiro de Cirurgiões; 10.1590/S0100-69912014000100012
Misch, C. M. (2011). Enxerto ósseo autógeno maxilar. Dent Clin Norte Am. 10.1016/j.coms.2011.01.003
Pushparajan, S., Thiagarajan, R., Namasi, A., Emmadi, P., & Saravanan, H. (2013). Eficácia da regeneração óssea guiada utilizando enxerto ósseo composto e membrana de colágeno reabsorvível em defeitos do rebordo Classe I de Seibert: avaliação radiológica. Jornal de Implantologia Oral , 39 (4), 455-462.
Rauber, S. (2019) Osseodensificação em implantes dentários: uma revisão de literatura. Brazilian Journal ofi implantology and Health Sciences. 1(4), 55- 68.
Sánchez-Sánchez, J., Pickert, F. N., Sánchez-Labrador, L. G. F., Tresguerres, F., Martínez- González, J. M., & Meniz-García, C. (2021). Horizontal Ridge Augmentation: A Comparison between Khoury and Urban Technique. Biology. 10, 749. https://doi.org/10.3390/biology10080749
Simion, M., Rocchietta, I., Kim, D., Nevins, M., & Fiorellini, J. (2006) Vertical ridge augmentation by means of deprotenized bovine boné block and recombinant human platelet-derived growth fator-BB: A histologic study in a dog model. Int J Periodontics Restorative Dent. 26:415-423
Sánchez-Labrador, L., Molinero-Mourelle, P., Pérez-González, F., Saez-Alcaide, L. M., Brinkmann, J. C. B., Martínez, J. L. Q., Martínez-González, J. M. (2021). Desempenho clínico do aumento do rebordo alveolar com enxertos de bloco ósseo xenogênico versus enxertos de bloco ósseo autógeno. Uma revisão sistemática. Jornal de estomatologia, cirurgia oral e maxilofacial, 122(3), 293-302.
Urban, I.A., Montero, E., Monje, A., Sanz-Sánchez, I. (2019). Effectiveness of vertical ridge augmentation interventions: A systematic review and meta-analysis. J Clin Periodontol..46(21), 319–339. https://doi.org/10.1111/jcpe.13061
Wang, H. L., & Boyapati L. (2006). "PASS" principles for predictable bone regeneration. Implant Dent. Mar;15(1):8-17. 10.1097/01.id.0000204762.39826.0f.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 André Almeida de Oliveira ; Karen Tamires Viau; Ana Luísa Bacile Katsui ; Alice Vaccari Ribeiro; Tulio Avelar Ferreira ; Emilly Anne Teixeira Pereira; Isabeli Lao Soller
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.