Evaluation of hydrophylic montmorillonite nanofluids and xantane gum in saline environment
DOI:
https://doi.org/10.33448/rsd-v9i8.5305Keywords:
Nanoclay; Xanthan; Drilling nanofluid; Rheology.Abstract
With an estimated increasing oil demand in the coming decades, the need to explore non-applicable areas is intensified, and associated with them, before the high exploration costs, the need to improve available technologies. In this sense, in the last decade, the application of nanoparticles to improve drilling fluids has been intensified. In this scenario, montmorillonite nanoclays and xanthan gums were little explored for the development of nanofluids. In this work, the influence of hydrophilic nanoclay on the rheological parameters of xanthan, sodium and calcium chlorides solutions was verified. For this, first, the clay was characterized by XRD, XRF and TGA. Then, maintaining constant the salt and xanthan concentrations, the influence of the variation in the concentration of nanoclay on the rheology of the solution was evaluated. Then, keeping the components concentrations constant, the influence of temperature was verified and then the hydration time on the rheology of the mixture. Finally, to assess the interaction of the mixture, it was verified the Electrical Conductivity and the Potential Zeta, varying the concentration of the nanoclay and the hydration time. It was concluded that: for certain nanoclay concentrations, there is an improvement in the rheology of xanthan solutions; an addition of nanoclay favors rheology in the mixture of xanthan with increased temperature; hydration time does not affect the rheology of the nanofluid; there is interaction between nanoclay and xanthan.References
Abdou, M. I. & Ahmed, H.E.-S. (2011). Effect of particle size of bentonite on rheological behavior of the drilling mud. Petrol. Sci. Technol., 29(21), 2220–2233. doi: 10.1080/10916461003663065
Abu-Jdayil, B. (2011). Rheology of sodium and calcium bentonite–water dispersions: Effect of electrolytes and aging time. Int. J. Miner. Process., 98(3-4),208–213. doi: 10.1016/j.minpro.2011.01.001
Aftab, A, Ismail, A.R., Ibupoto, Z.H., Akeiber, H.& Malghani, M.G.K. (2017). Nanoparticles based drilling muds a solution to drill elevated temperature wells: A review.Renew. Sust. Energ. Rev., 76, 1301–1313. doi: 10.1016/j.rser.2017.03.050
Alizadeh, S., Sabbaghi, S.& Soleymani, M. (2015). Synthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid. Int. J. Nano Dimens., 6(3), 271-276. doi: 10.7508/IJND.2015.03.006
Al-Yasiri, M., Awad, A., Pervaiz, S.& Wen, D. (2019). Influence of silica nanoparticles on the functionality of water-based drilling fluids. J. Petrol. Sci. Eng., 179, 504–512. doi: 10.1016/j.petrol.2019.04.081
Al-Yasiri, M. S. & Al-Sallami, W.T. (2015). How the Drilling Fluids Can be Made More Efficient by Using Nanomaterials. Am. J. Nano Res. Appl., 3, 41-45. doi: 10.11648/j.nano.20150303.12
Amanullah, M., Al-Arfaj, M. K. & Al-Abdullatif, Z.A. (2011, March 1-3). Preliminary test results of nano-based drilling fluids for oil and gas field application. Paper presented at theSPE/IADC Drilling Conference and Exhibition. Amsterdam: Society of Petroleum Engineers.
Amiri, M. C. & Sadeghialiabadi, H. (2014). Evaluating the Stability of Colloidal Gas Aphrons in the Presence of Montmorillonite Nanoparticles. Colloid. Surface. A, 457, 212-219. doi: 10.1016/j.colsurfa.2014.05.076
Amorim, L.V. (2003). Melhoria, Proteção e Recuperação da Reologia de Fluidos Hidroargilosos para Uso na Perfuração de Poços de Petróleo. (Doctoral Thesis). Universidade Federal de Campina Grande, Campina Grande, PB.
Barry, M.M., Jung, Y., Lee, J. -K., Phuoc, T.X.& Chyu, M.K. (2015).Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluids. J. Petrol. Sci. Eng., 127, 338–346. doi: 10.1016/j.petrol.2015.01.012
Benyounes, K., Mellak, A. & Benchabane, A. (2010). The Effect of Carboxymethylcellulose and Xanthan on the Rheology of Bentonite Suspensions. Energy Source. Part A, 32(17), 1634–1643. doi: 10.1080/15567030902842244
Bera, A.& Belhaj, H. (2016). Application of nanotechnology by means of nanoparticles and nanodispersions in oil recovery - A comprehensive review. J. Nat. Gas Sci. Eng., 34, 1284-1309. doi: 10.1016/j.jngse.2016.08.023
Bordi, F. & Carnetti, C. (1986). Equivalent Conductivity of Carboxymethylcellulose Aqueous Solutions with Divalent Counterions. J. Phys. Chem., 90(13), 3034-3038. doi: 10.1021/j100404a049
Borges, C.D., Vendruscolo, C.T., Martins, A.L.; Lomba, R.F.T. (2009). Comportamento Reológico de Xantana Produzida por Xanthomonas arboricola pv pruni para Aplicação em Fluido de Perfuração de Poços de Petróleo. Polimeros, 19(2), 160-165. doi: 10.1590/S0104-14282009000200015
Caenn, R., Darley, H. C. H. & Gray, G. R. (2014). Fluidos de Perfuração e Completação (6 ed.). Rio de Janeiro, RJ: Elsevier B. V..
Cheraghian, G. (2017). Application of Nano-Particles of Clay to Improve Drilling Fluid. Int. J. Nanosci. Nanotechnol., 13(2), 177-186.
Cheraghian, G., Wu, Q., Mostofi, M., Li, M.-C., Afrand, M. & Sangwai, J.S. (2018). Effect of a Novel Clay/silica Nanocomposite on Water-Based Drilling Fluids: Improvements in Rheological and Filtration Properties. Colloid.Surface. A, 555, 339-350. doi: 10.1016/j.colsurfa.2018.06.072
Choppe, E., Puaud, F., Nicolai, T.& Benyahia, L. (2010). Rheology of xanthan solutions as a function of temperature, concentration and ionic strength.Carbohydr. Polym., 82(4), 1228–1235. doi: 10.1016/j.carbpol.2010.06.056
Chung, Y.-L.& Lai, H.-M. (2010). Preparation and properties of biodegradable starch-layered double hydroxide Nanocomposites. Carbohydr. Polym., 80(2), 525–532. doi: 10.1016/j.carbpol.2009.12.020
Comba, S., Dalmazzo, D., Santagata, E.& Sethi, R. (2011).Rheological characterization of xanthan suspensions of nanoscale iron for injection in porous media. J. Hazard. Mater., 185(2-3), 598–605. doi: 10.1016/j.jhazmat.2010.09.060
Contreras, O., Hareland, G., Husein, M., Nygaard, R.& Al-Saba, M. (2014, February 26-28). Application of in-house prepared nanoparticles as filtration control additive to reduce formation damage. Paper presented at theSPE International Symposium and Exhibition on Formation Damage Control. Lafayette, LA: Society of Petroleum Engineers. doi: 10.2118/168116-MS
Dolez, P.I. (2015). Nanoengineering: Global Approaches to Health and Safety Issues (pp. 3-40). Amsterdam: Elsevier B. V..
Energy Information Administration. (2017, September 14). EIA projects 28% increase in world energy use by 2040. Retrieved March 27, 2020, from https://www.eia.gov/todayinenergy/detail.php?id=32912.
Energy Information Administration. (2006, June). International Energy Outlook 2006. Retrieved March 28, 2020, from http://www.economicswebinstitute.org/essays/energy2006.pdf
Fakoya, M.F.& Shah, S.N. (2013, March 26-27). Rheological Properties of Surfactant-Based and Polymeric Nano-Fluids. Paper presented at theSPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition. The Woodlands, TX: Society of Petroleum Engineers. doi: 10.2118/163921-MS
Fitzgerald, B. L., McCourt, A. J. & Brangetto, M. (2000, February 23-25). Drilling Fluid Plays Key Role in Developing the Extreme HTHP, Elgin/Franklin Field. Paper presented at the IADC/SPE Drilling Conference. New Orleans, LA: Society of Petroleum Engineers. doi: 10.2118/59188-MS
Gaidzinski, R., Osterreicher-Cunha, P., Duailibi Fh., J. & Tavares, L. M. (2009) Modification of clay properties by aging: Role of indigenous microbiota and implications for ceramic processing. Appl. Clay Sci., 43(1), 98–102. doi: 10.1016/j.clay.2008.07.007
García-Ochoa, F., Santos, V.E., Casas, J.A.& Gómez, E. (2000). Xanthan gum: production, recovery, and properties.Biotechnol. Adv., 18(7), 549-579. doi: 10.1016/S0734-9750(00)00050-1
Gierszewska, M., Jakubowska, E.& Olewnik-Kruszkowska, E. (2019). Effect of chemical crosslinking on properties of chitosan-montmorillonite composites. Polym. Test., 77, 105872. doi: 10.1016/j.polymertesting.2019.04.019
Golubeva, O. Y., Ul’yanova, N. Y., Kostyreva, T. G., Drozdova, I. A. & Mokeev, M. V. (2013). Synthetic Nanoclays with the Structure of Montmorillonite: Preparation, Structure, and Physico-Chemical Properties. Glass Phys. Chem+, 39(5), 533–539. doi: 10.1134/S1087659613050088
Grim, R. E. & Güven, N. (1978).Bentonites: Geology, Mineralogy, Properties and Uses Developments in Sedimentology(24 ed.). Amsterdam: Elsevier Scientific Publishing Company.
Hassani, A. H & Ghazanfari, M.H. (2017). Improvement of non-aqueous colloidal gas aphron-based drilling fluids properties: Role of hydrophobic nanoparticles. J. Nat. Gas Sci. Eng., 42, 1-12. doi: 10.1016/j.jngse.2017.03.005
Herschel, W.H.& Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Z., 39, 291–300.
Hoelscher, K. P., Stefano, G.D., Riley, M. & Young, S. (2012, June 12-14). Application of nanotechnology in drilling fluids. Paper presented at theSPE International Oilfield Nanotechnology Conference and Exhibition. Noordwijk: Society of Petroleum Engineers. doi: 10.2118/157031-MS
Hoidy, W.H., Ahmad, M. B., Al Mulla, E.A.J.& Ibrahim, N.A.B. (2009). Synthesis and Characterization of Organoclay from Sodium Montmorillonite and Fatty Hydroxamic.Acids. Am. J. Appl. Sci., 6(8), 1567-1572. doi: 10.3844/ajassp.2009.1567.1572
Holme, K. R., Hall, L. D, Speers, R.A.& Tung, M.A. (1988). High shear rate flow behavior of xanthan gum dispersions. Food Hydrocoll., 2(2), 159-167. doi: 10.1016/S0268-005X(88)80014-6
Howard, S., Kaminski, L.& Downs, J. (2015, June 3-5). Xanthan stability in formate brines - Formulating non-damaging fluids for high temperature applications. Paper presented at theSPE European Formation Damage Conference and Exhibition.Budapest: Society of Petroleum Engineers. doi: 10.2118/174228-MS
Ismail, A. R., Aftab, A., Ibupoto, Z. H. & Zolkifile, N. (2016). The novel approach for the enhancement of rheological properties of water-based drilling fluids by using multi-walled carbono nanotube, nanosilica and glass beads. J. Petrol. Sci. Eng., 139, 264–275. doi: 10.1016/j.petrol.2016.01.036
Jain, R. & Mahto, V. (2015). Evaluation of polyacrylamide/clay composite as a potential drilling fluid additive in inhibitive water based drilling fluid system. J. Petrol. Sci. Eng., 133, 612–621. doi: 10.1016/j.petrol.2015.07.009
Jang, H.Y., Zhang, K., Chon, B.H.& Choi, H.J. (2015). Enhanced oil recovery performance and viscosity characteristics of polysaccharide xanthan gum solution. J. Ind. Eng. Chem., 21, 741–745. doi: 10.1016/j.jiec.2014.04.005
Kelco, C. Q. (2000). Xanthan gum book (8 ed.). Atlanta, GA: C. Q. Kelco.
Kelessidis, V.C.& Maglione, R. (2008). Yield stress of water–bentonite dispersions. Colloid.Surface. A, 318(1-3), 217–226. doi: 10.1016/j.colsurfa.2007.12.050
Kelessidis, V. C., Maglione, R., Tsamantaki, C.& Aspirtakis, Y. (2006). Optimal determination of rheological parameters for Herschel–Bulkley drilling fluids and impact on pressure drop, velocity profiles and penetration rates during drilling. J. Petrol. Sci. Eng., 53(3-4), 203–224. doi: 10.1016/j.petrol.2006.06.004
Kelessidis, V.C., Papanicolaou, C.& Foscolos, A. (2009).Application of Greek lignite as an additive for controlling rheological and filtration properties of water–bentonite suspensions at high temperatures: A review. Int. J. Coal Geol., 77(3-4), 394–400. doi: 10.1016/j.coal.2008.07.010
Kelessidis, V.C., Tsamantaki, C.& Dalamarinis, P. (2007). Effect of pH and electrolyte on the rheology of aqueous Wyoming bentonite dispersions. Appl. Clay Sci., 38(1-2), 86–96. doi: 10.1016/j.clay.2007.01.011
Kennedy, J.R.M., Kent, K.E.& Brown, J.R. (2015). Rheology of dispersions of xanthan gum, locust bean gum and mixed biopolymer gel with silicon dioxide nanoparticles. Mat. Sci. Eng. C, 48, 347–353. doi: 10.1016/j.msec.2014.12.040
Khalil, M. & Jan, B.M. (2012). Herschel-Bulkley Rheological Parameters of a Novel Environmentally Friendly Lightweight Biopolymer Drilling Fluid from Xanthan Gum and Starch. J. Appl. Polym. Sci., 124(1), 595–606. doi: 10.1002/app.35004
Khodja, M., Canselier, J. P., Bergaya, F., Fourar, K., Khodja, M., Cohaut, N. & Bemounah, A. (2010). Shale problems and water-based drilling fluid optimisation in the Hassi Messaoud Algerian oil field. Appl. Clay Sci., 49(4), 383-393. doi: 10.1016/j.clay.2010.06.008
Khunawattanakul, W., Puttipipatkhachorn, S., Rades, T.& Pongjanyakul, T. (2010). Chitosan–magnesium aluminum silicate nanocomposite films: Physicochemical characterization and drug permeability. Int. J. Pharm., 393(1-2), 219–229. doi: 10.1016/j.ijpharm.2010.04.007
Laird, D.A. (2006). Influence of layer charge on swelling of smectites. Appl. Clay Sci., 34(1-4), 74–87. doi: 10.1016/j.clay.2006.01.009
Li, M., Wu, Q., Song, K., Hoop, C.F. D., Lee, S., Qing, Y.& Wu, Y. (2016). Cellulose Nanocrystals and Polyanionic Cellulose as Additives in Bentonite Water-Based Drilling Fluids: Rheological Modeling and Filtration Mechanisms. Ind. Eng. Chem. Res., 55(1), 133–143. doi: 10.1021/acs.iecr.5b03510
Liu, H., Nakagawa, K., Chaudhary, D., Asakuma, Y. & Tadé; M. O. (2011). Freeze-dried macroporous foam prepared from chitosan/xanthan gum/montmorillonite nanocomposites. Chem. Eng. Res. Des., 89(11), 2356–2364. doi: 10.1016/j.cherd.2011.02.023
Lucena, D. V., Lira, H. L. & Amorim, L. V. (2014). Efeito de aditivos poliméricos nas propriedades reológicas e de filtração de fluidos de perfuração. Tecnol. Metal Mater. Miner., 11(1), 66-73. doi: 10.4322/tmm.2014.010
Luporini, S. & Bretas, R. E. S. (2011). Caracterização Reológica da Goma Xantana: Influência de Íons Metálicos Univalente e Trivalente e Temperatura em Experimentos Dinâmicos. Polimeros, 21(3), 188-194. doi: 10.1590/S0104-14282011005000043
Maghzi, A., Kharrat, R., Mohebbi, A. & Ghazanfari, M.H. (2014).Theimpact of silica nanoparticles on the performance of polymer solution in presence of salts in polymer flooding for heavy oil recovery. Fuel, 123, 123–132. doi: 10.1016/j.fuel.2014.01.017
Mariani, F. Q., Villalba, J. C. & Anaissi, F.J. (2013). Caracterização Estrutural de Argilas Utilizando DRX com Luz Síncrotron, MEV, FTIR e TG-DTG-DTA. Orbital: Electronic J. Chem.,5(4), 249-256.
Melo, C., Garcia, P.S., Grossmann, M.V.E., Yamashita, F., Dall’Antônia, L. H. &Mali, S. (2011).Properties of Extruded Xanthan-Starch-Clay Nanocomposite Films. Braz. Arch.Biol. Technol., 54(6), 1223-1333. doi: 10.1590/S1516-89132011000600019
Melo, K. C. (2008). Avalição e modelagem reológica de fluidos de perfuração base água (Master’s Thesis). Universidade Federal do Rio Grande do Norte, Natal, RN.
Mélo, T. J. A., Araújo, E. M., Brito, G. F. & Agrawal, P. (2014). Development of nanocomposites from polymer blends: effect of organoclay on the morphology and mechanical properties. J. Alloy Compd., 615, S391-S391. doi: 10.1016/j.jallcom.2013.11.151
Menezes, R. R., Melo, L.R.L., Fonseca, F.A. S., Ferreira, H. S., Martins, A. B. & Neves, G.A. (2008). Caracterização de argilas bentoníticas do Município de Sussego, Paraíba, Brasil. Revista Eletrônica de Materiais e Processos, 3(2), 36-43.
Monteiro, S. N. & Vieira, C. M. F. (2004). Influence of firing temperature on the ceramic properties of clays from Campos dos Goytacazes, Brazil. Appl. Clay Sci., 27(3-4), 229–234. doi: 10.1016/j.clay.2004.03.002
Morariu, S., Bercea, M. & Brunchi, C.-E. (2018). Phase separation in xanthan solutions. Cellul. Chem. Technol., 52(7-8), 569-576.
Morita, R. Y., Barbosa, R. V. & Kloss, J. R. (2015). Caracterização de Bentonitas Sódicas: Efeito do Tratamento com Surfactante Orgânico Livre de Sal de Amônio. Rev. Virtual Quim.,7(4),1286-1298. doi: 10.5935/1984-6835.20150071
Nejad, M.H., Ganster, J., Bohn, A., Volkert, B.& Lehmann, A. (2011). Nanocomposites of starch mixed esters and MMT: Improved strength, stiffness, and toughness for starch propionate acetate laurate. Carbohydr. Polym., 84(1), 90–95. doi: 10.1016/j.carbpol.2010.10.067
Noori, S., Kokabi, M. & Hassan, Z.M. (2015). Nanoclay Enhanced the Mechanical Properties of Poly(Vinyl Alcohol)/Chitosan/Montmorillonite Nanocomposite Hydrogel as Wound Dressing. Procedia Mater.Sci., 11, 152–156. doi: 10.1016/j.mspro.2015.11.023
Oueslati, W., Ammar, M.& Chorfi, N. (2015). Quantitative XRD Analysis of the Structural Changes of Ba-Exchanged Montmorillonite: Effect of an in Situ Hydrous Perturbation. Minerals, 5, 507-526. doi: 10.3390/min5030507
Parizad, A., Shahbazi, K. & Tanha, A. A. (2018). Enhancement of polymeric water-based drilling fluid properties using nanoparticles. J. Petrol. Sci. Eng., 170, 813–828. doi: 10.1016/j.petrol.2018.06.081
Perween, S., Thakur, N. K., Beg, M., Sharma, S. & Ranjan, A. (2019). Enhancing the properties of Water based Drilling Fluid using Bismuth Ferrite Nanoparticles. Colloid. Surface. A, 561, 165-177. doi: 10.1016/j.colsurfa.2018.10.060
Ponmani, S., William, J. K. M., Samuel, R., Nagarajan, R. & Sangwai, J. S. (2014). Formation and characterization of thermal and electrical properties of CuO and ZnO nanofluids in xanthan gum. Colloid. Surface. A, 443, 37–43. doi: 10.1016/j.colsurfa.2013.10.048
Pooja, D., Panyaram, S., Kulhari, H., Rachamalla, S.S.& Sistla, R. (2014). Xanthan gum stabilized gold nanoparticles: Characterization, Biocompatibility, Stability and Cytotoxicity. Carbohydr. Polym., 110, 1-9. doi: 10.1016/j.carbpol.2014.03.041
Prodanov, C. C. & Freitas, E. C. (2013). Metodologia do Trabalho Científico: Métodos e Técnicas de Pesquisa e do Trabalho Acadêmico (2nd ed., pp. 129-141). Feevale. http://www.feevale.br/Comum/midias/8807f05a-14d0-4d5b-b1ad-1538f3aef538/E-book%20Metodologia%20do%20Trabalho%20Cientifico.pdf
Rao, M. A., Rizvi, S. S. H. & Datta, A. K. (2005). Engineering Properties of Foods (3 ed, pp. 461-500). Boca Raton, FL: Taylor and Francis Group.
Reinoso, D., Martín-Alfonso, M.J., Luckham, P.F.& Martínez-Boza, F.J. (2019). Rheological characterisation of xanthan gum in brine solutions at high temperature. Carbohydr. Polym., 203, 103–109. doi: 10.1016/j.carbpol.2018.09.034
Riley, M., Young, S., Stamatakis, E., Guo, Q., Ji, L., Stefano, G. D.,… & Friedheim, J. (2012, March 28-30). Wellbore stability in unconventional shales-the design of a nanoparticle fluid. Paper presented at theSPE Oil and Gas India Conference and Exhibition. Mumbai, MH: Society of Petroleum Engineers. doi: 10.2118/153729-MS
Rochefort, W. E. & Middleman, S. (1987). Rheology of Xanthan Gum: Salt, Temperature, and Strain Effects in Oscillatory and Steady Shear Experiments. J. Rheol., 31, 337-369. doi: 10.1122/1.549953
Rojtanatanya, S. & Pongjanyakul, T. (2010). Propranolol-magnesium aluminum silicate complex dispersions and particles: characterization and factors influencing drug release. Int. J; Pharm., 383(1-2), 106-115. doi: 10.1016/j.ijpharm.2009.09.016
Rongthong, T., Sungthongjeen, S., Siepmann, J.& Pongjanyakul, T. (2013). Quaternary polymethacrylate-magnesium aluminum silicate films: molecular interactions, mechanical properties and tackiness. Int. J; Pharm., 458(1), 57-64. doi: 10.1016/j.ijpharm.2013.10.016
Sadeghalvaad, M & Sabbaghi, S. (2015). The Effect of the TiO2/Polyacrylamide Nanocomposite on Water-Based Drilling Fluid Properties. Powder Technol., 272, 113–119. doi: 10.1016/j.powtec.2014.11.032
Sagou, J.-P. S.; Ahualli, S. & Thomas, F. (2015). Influence of ionic strength and polyelectrolyte concentration on the electrical conductivity of suspensions of soft colloidal polysaccharides. J. Colloid Interf. Sci., 459, 212–217. doi: 10.1016/j.jcis.2015.08.001
Salopek, B., Krasić, D. & Filipović, S. (1992). Measurement and application of zeta-potential.Rud.-geol.-naft.zb., 4,147-151.
Santos, P. S. (2000). Tecnologia das Argilas: Fundamentos (Vol. 1). São Paulo, SP: Edgard Blücher.
Santos, R. F. A., Reis, M. M., Ueki, M. M., Santos, Z. I. G. & Brito, G. F. (2016, November 6-10). Influência da argila montmorilonita nas propriedades mecânicas e morfológicas de nanocompósitos obtidos a partir de blendas de polietileno/poli (tereftalato de etileno). Paper presented at the 22º Congresso Brasileiro de Engenharia e Ciência dos Materiais. Natal, RN: Associação Brasileira de Cerâmica.
Sato, T., Watanabe, T.& Otsuka, R. (1992).Effects of layer charge, charge location, and energy change on expansion proprerties of dioctahedral smectites. Clay. Clay Miner., 40(1), 103-113. doi: 10.1346/CCMN.1992.0400111
Shakib, J. T., Kanani, V. & Pourafshary, P. (2016). Nano-clays as additives for controlling filtration properties of water - bentonite suspensions. J. Petrol. Sci. Eng., 138, 257-264. doi: 10.1016/j.petrol.2015.11.018
Shaw, D. J. (1992). Colloid and Surface Chemistry (4 ed., pp.174-243). Oxford: Elsevier Science Ltd.
Slavutsky, A. M., Bertuzzi, M. A. & Armada, M. (2012). Water barrier properties of starch-clay nanocomposite films. Braz. J. Food. Technol., 15(3), 208-218. doi: 10.1590/S1981-67232012005000014
Soliman, A. A., El-hoshoudy, A.N.& Attia, A.M. (2020). Assessment of xanthan gum and xanthan-g-silica derivatives as chemical flooding agents and rock wettability modifiers. Oil Gas Sci. Technol., 75(12). doi: 10.2516/ogst/2020004
Speers, R. A. & Tung, M. A. (1986). Concentration and Temperature Dependence of Flow Behavior of Xanthan Gum Dispersions. J. Food Sci., 51(1), 96-98. doi: 10.1111/j.1365-2621.1986.tb10844.x
Srivatsa, J. T. & Ziaja, M.B. (2011, November 15-17). An experimental investigation on use of nanoparticles as fluid loss additives in a surfactant-polymer based drilling fluids. Paper presented at theInternational Petroleum Technology Conference. Bangkok: Society of Petroleum Engineers. doi: 10.2523/IPTC-14952-MS
Taheri, A. & Jafari, S.M. (2019). Biopolymer Nanostructures for Food Encapsulation Purposes (Vol.1, 1 ed., pp.521-578). Amsterdam: Elsevier B.V.
Tang, X., Alavi, S. &Herald, T.J. (2008). Effects of plasticizers on the structure and properties of starch–clay. Carbohydr. Polym., 74(3), 552–558. doi: 10.1016/j.carbpol.2008.04.022
Thonart, Ph., Paquot, M., Hermans, L. & Alaoui, H. (1985). Xanthan production by Xanthomonas campestris NRRL B-1459 and interfacial approach by zeta potential measurement. Enzyme Microb. Technol., 7(5), 235-238. doi: 10.1016/S0141-0229(85)80009-0
Uddin, F. (2008). Clays, Nanoclays, and Montmorillonite Minerals. Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 39(A), 2804-2814.
Villaça, J. C., Silva, L.C.R. P., Barbosa, L.H. F., Rodrigues, C. R., Lira, L. M., Carmo, F. A.,... & Cabral, L.M. (2014). Preparation and characterization of polymer/layered silicate pharmaceutical nanobiomaterials using high clay load exfoliation processes. J. Ind. Eng. Chem., 20(6), 4094-4101.
Vipulanandan, C. & Mohammed, A. (2015). Effect of nanoclay on the electrical resistivity and rheological properties of smart and sensing bentonite drilling muds. J. Petrol. Sci. Eng., 130, 86-95. doi: 10.1016/j.petrol.2015.03.020
Vryzas, Z. & Kelessidis, V.C. (2017). Nano-Based Drilling Fluids: A Review. Energies, 10(4), 540, 1-34. doi: 10.3390/en10040540
Vryzas, Z., Wubulikasimu, Y., Gerogiorgis, D. I. & Kelessidis, V. C. (2016). Understanding the Temperature Effect on the Rheology of Water-Bentonite Suspensions. Annual Transactions - The Nordic Rheology Society, 24, 199-208.
Wang, Y., Xiong, Y., Wang, J.& Zhang, X. (2017). Ultrasonic-assisted fabrication of montmorillonite-lignin hybrid hydrogel: highly efficient swelling behaviors and super-sorbent for dye removal from wastewater. Colloid.Surface. A, 520, 903-913. doi: 10.1016/j.colsurfa.2017.02.050
William, J.K. M., Ponmani, S., Samuel, R., Nagarajan, R.& Sangwai, J.S. (2014). Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water-based drilling fluids. J. Petrol. Sci. Eng., 117, 15–27. doi: 10.1016/j.petrol.2014.03.005
Wyatt, N. B. & Liberatore, M. W. (2010). The effect of counterion size and valency on the increase in viscosity in polyelectrolyte solution. Soft Matter, 6(14), 3346–3352. doi: 10.1039/C000423E
Wyatt, N. B. & Liberatore, M. W. (2009). Rheology and Viscosity Scaling of the Polyelectrolyte Xanthan Gum. J. Appl. Polym. Sci., 114, 4076–4084. doi: 10.1002/app.31093
Wyatt, N. B., Gunther, C. M. & Liberatore, M. W. (2011). Increasing viscosity in entangled polyelectrolyte solutions by the addition of salt. Polymer, 52(11), 2437-2444. doi: 10.1016/j.polymer.2011.03.053
Xie, W. & Lecourtier, J. (1992). Xanthan behavior in water-fluid drilling fluids. Polym. Degrad. Stabil., 38(2), 155-164.
Xie, W., Gao, Z., Pan, W. P., Hunter, D., Singh, A. & Vaia, R. (2001). Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite. Chem. Mater., 13(9), 2979-2990. doi: 10.1021/cm010305s
Yang, K. K., Wang, X. L. & Wang, Y. Z. (2007). Progress in Nanocomposite of Biodegradable Polymer. J. Ind. Eng. Chem., 13(4), 485-500.
You, Z., Mills-Beale, J., Foley, J. M., Roy, S., Odegard, G. M., Dai, Q. & Goh, S. W. (2011). Nanoclay-modified asphalt materials: Preparation and characterization. Constr. Build. Mater., 25(2), 1072–1078. doi: 10.1016/j.conbuildmat.2010.06.070
Zhong, L., Oostrom, M., Truex, M. J., Vermeul, V. R. & Szecsody, J. E. (2013). Rheological behavior of xanthan gum solution related to shear thinning fluid delivery for subsurface remediation. J. Hazard. Mater., 244–245, 160–170. doi: 10.1016/j.jhazmat.2012.11.028
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
