General aspects of the armed concrete and the technical procedures for their use

Authors

  • Pedro Emílio Amador Salomão Universidade Federal dos Vales do Jequitinhonha e Mucuri
  • André Andrade Dos Santos Universidade Federal dos Vales do Jequitinhonha e Mucuri
  • Acly Ney Santiago Oliveira Universidade Presidente Antônio Carlos

DOI:

https://doi.org/10.33448/rsd-v8i6.1020

Keywords:

Civil construction. Construction system. Reinforced concrete.

Abstract

The population growth fostered several segments of industry, in which one finds among them the construction industry can. In this sense of growth, the construction of houses passed and be considered a fundamental part of the economy of the country, by employing a large amount of manpower besides fomenting a whole chain of suppliers. To boost the construction, the reinforced concrete had a primordial role because with its use it was possible to optimize time and resources, obtaining safer constructions and of better quality. The objective of this work is to demonstrate the use of reinforced concrete in the structural systems of buildings, observing the different normative criteria in relation to the understanding of the design and dimensioning of the structures. The paper describes the history of reinforced concrete in civil construction, exposing its evolution that was provided by the technical diffusion of the methods of calculations; presents the reinforced concrete and its components, the structural elements of the reinforcing concrete, the technical procedures for the use of this constructive system. In demonstrating the general aspects of the reinforced concrete and the technical procedures for its use, it is intended to contribute to projects being better observed in their elaboration, so that the specifications and procedures are followed during the execution.

References

NBR, A. B. N. T. (2014). 6118: Projeto de Estruturas de Concreto. Rio de Janeiro.

de Souza, C. B., Sorentino, M., & Bonini, A. CONCRETO CONTENDO NA SUA COMPOSIÇÃO O EPS.

Araújo, J. M. D. (2003). Curso de concreto armado. Editora Dunas, Rio Grande do Sul, v2.

BASTOS, P. S. D. S. (2006). Fundamentos do concreto armado. Bauru: UNESP.

Carvalho, R. C., & Pinheiro, L. M. (2009). Cálculo e detalhamento de estruturas usuais de concreto armado. Pini.

Couto, J. A. S., Carminatti, R. L., Nunes, R. R. A., & Moura, R. C. A. (2013). O concreto como material de construção. Caderno de Graduação-Ciências Exatas e Tecnológicas-UNIT, 1(3), 49-58.

Fonseca, R. P. D. “Escriptório technico Emílio H. Baumgart”: Escola do Concreto Armado e a arquitetura modernista brasileira.

Lima, S. F., Lima, C. I. V., Coutinho, C. O. D., Azevedo, G. G. C., Barros, T. Y. G., & Tauber, T. C. (2014). Concreto e suas inovações. Caderno de Graduação-Ciências Exatas e Tecnológicas-UNIT-ALAGOAS, 1(1), 31-40.

Mehta, P. K., Monteiro, P. J., & Carmona Filho, A. (1994). Concreto: estrutura, propriedades e materiais. Pini.

Pinheiro, L. M. (2007). Fundamentos do concreto e projeto de edifícios.

Ravara, P. B. (2008). A consolidação de uma prática: do edifício fabril em betão armado nos EUA aos modelos europeus na modernidade.

dos Santos, R. E. (2008). A Armação do Concreto no Brasil: história da difusão da tecnologia do concreto armado e da construção de sua hegemonia.

Souza, M. A. D. (2017). O concreto armado nas edificações de Salvador no período entre guerras (1919-1938).

Takata, LT (2009). Aspectos relativos a qualidade de estruturas em concreto armado: estudo de caso.

VASCONCELOS, A. C. D. (1985). O Concreto no Brasil: Recordes, Realizações. História, 1.

Downloads

Published

08/03/2019

How to Cite

SALOMÃO, P. E. A.; SANTOS, A. A. D.; OLIVEIRA, A. N. S. General aspects of the armed concrete and the technical procedures for their use. Research, Society and Development, [S. l.], v. 8, n. 6, p. e2861020, 2019. DOI: 10.33448/rsd-v8i6.1020. Disponível em: https://rsdjournal.org/index.php/rsd/article/view/1020. Acesso em: 22 nov. 2024.

Issue

Vol. 8 No. 6

Section

Engineerings

License

Authors who publish with this journal agree to the following terms:

1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.