Mechanical, chemical and biological properties of PLA 3D printer: A systematic review
DOI:
https://doi.org/10.33448/rsd-v12i12.43986Keywords:
Polylactic acid-polyglycolic; Dentistry; Printing; Systematic review.Abstract
The aim of this systematic review is to evaluate, through the in vitro studies included, whether PLA has mechanical, chemical and biological properties that enable its clinical use in dentistry. An electronic search was carried out in the Pubmed, Science Direct, Embase and Scopus databases containing the terms ''polylactic acid'', ''3D printing'',''biomaterials'',''dental materials'', dental prosthesis and dentistry. The objective of the inclusion criteria was to cover articles written and published in English that focused on the use of PLA in the field of dental materials and biomaterials printed using the 3D method. Any articles that did not focus on the study of PLA polymer, as well as systematic reviews, book chapters, abstracts, letters and conference articles were excluded. 1814 references were found, which after applying the exclusion criteria resulted in the final inclusion of 13 articles for the review. Based on the studies included in this systematic review, it is possible to conclude that 3D printed PLA used as a dental material and biomaterial presents favorable mechanical, chemical and biological properties that indicate its potential clinical use.
References
Alksne, M., Kalvaityte, M., Simoliunas, E., Gendviliene, I., Barasa, P., Rinkunaite, I., Kaupinis, A., Seinin, D., Rutkunas, V., & Bukelskiene, V. (2022). Dental pulp stem cell-derived extracellular matrix: autologous tool boosting bone regeneration. Cytotherapy. 24(6):597-607. 10.1016/j.jcyt.2022.02.002.
Ang, H. Y., Chan, J., Toong, D., Venkatraman, S. S., Chia, S. J., & Huang, Y. Y. (2017). Tailoring the mechanical and biodegradable properties of binary blends of biomedical thermoplastic elastomer. J Mech Behav Biomed Mater. 79:64-72. 10.1016/j.jmbbm.2017.12.013.
Behzadnasab M., Yousefi A. A, Ebrahimibagha D., & Nasiri F. (2020) Efeitos das condições de processamento nas propriedades mecânicas de peças impressas em PLA. Protótipo Rápido. J. 26 :381–389. 10.1108/RPJ-02-2019-0048.
Bona, A. D., Cantelli, V., Britto, V. T., Collares, K. F., & Stansbury, J. W. (2021). 3D printing restorative materials using a stereolithographic technique: a systematic review. Dent Mater 37:336–350. https:// doi.org/10.1016/j.dental.2020.11.030.
Brounstein, Z., Yeager, C. M., & Labouriau, A. (2021) Development of Antimicrobial PLA Composites for Fused Filament Fabrication. Polymers (Basel). 13(4):580. 10.3390/polym13040580.
Caviezel, C., Grünwald, R., Ehrenberg-Silies, S., Gentil, S., Jetzke, T., Bovenschulte, M. (2017). Additive Fertigungsverfahren (3D-Druck)—Innovationsanalyse ; TAB Arbeitsbereicht: Berlim, Alemanha, 2017.
Charasseangpaisarn, T., Wiwatwarrapan, C., & Srimaneepong, V. (2022). Thermal Change Affects Flexural and Thermal Properties of Fused Deposition Modeling Poly (Lactic Acid) and Compression Molding Poly (Methyl Methacrylate). Eur J Dent. 10.1055/s-0042-1743148
Chen, T., Wang, D., Chen, X., Qiu, M., & Fan, Y. (2022). Three-dimensional printing of high-fux ceramic membranes with an asymmetric structure via digital light processing. Ceram Int 48:304–312. https://doi.org/10.1016/j.ceramint.2021.09.105.
Coppola, B., Schmitt, J., Lacondemine, T., Tardivat, C., Montanaro, L., & Palmero, P. (2022). Digital Light Processing stereolithography of zirconia ceramics: slurry elaboration and orientation-reliant mechanical properties. J Eur Ceram Soc 42:2974–2982. https://doi.org/10.1016/j.jeurceramsoc. 2022.01.024.
Cresswell-Boyes, A.J., Barber, A. H., Mills, D., Tatla, A., & Davis, G. R. (2018). Approaches to 3D printing teeth from X-ray microtomography. J Microsc. 272(3):207-212. 10.1111/jmi.12725.
Cuan-Urquizo, E., Barocio, E., Tejada-Ortigoza, V., Pipes, R. B., Rodriguez, C. A., & Roman-Flores, A. (2019). Caracterização das propriedades mecânicas de estruturas e materiais FFF: Uma revisão das abordagens experimental, computacional e teórica. Materiais. 12 :895.
D’Anna, A., Arrigo, R., & Frache, A. (2019). PLA/PHB blends: biocompatibilizer effects. Polymers (Basel).11:1416. https://doi.org/10.3390/polym11091416.
da Silva, G. G., Shimano, M. V. W., Macedo, A. P., da Costa Valente, M. L., & Dos Reis, A. C. (2022). In vitro assessment of polyetheretherketone for an attachment component for an implant-retained overdenture. J Prosthet Dent 127(2):319-e1. https://doi.org/10.1016/j.prosdent.2021.07.031.
Dawood, A., Marti, B., Sauret-Jackson, V., & Darwood, A. (2015). 3D printing in dentistry. Br Dent J. 219(11):521-9. 10.1038/sj.bdj.2015.914.
Dawood, A., Martí, B., Sauret Jackson, V., & Darwood, A. (2015). Impressão 3D em odontologia. Br. Dente. J. 219, 521–529.
de Campos, MR, Kreve, S., da Silva, GG et al. Análise mecânica e microestrutural de um novo modelo de attachments para overdentures retidos por mini-implantes obtidos por impressão 3D com três diferentes polímeros. Polim. Touro. (2023). https://doi.org/10.1007/s00289-023-04871-w
Deng, K., Chen, H., Zhao, Y., Zhou, Y., Wang, Y., & Sun, Y. (2018). Evaluation of adaptation of the polylactic acid pattern of maxillary complete dentures fabricated by fused deposition modelling technology: A pilot study. PLoS One. 13(8): e0201777. 10.1371/journal.pone.0201777.
Deng, K. H., Wang, Y., Chen, H., Zhao, Y. J., Zhou, Y. S., & Sun, Y. C. (2017). Quantitative evaluation of printing accuracy and tissue surface adaptation of mandibular complete denture polylactic acid pattern fabricated by fused deposition modeling technology. Zhonghua Kou Qiang Yi Xue Za Zhi. 52(6):342-345. Chinese. 10.3760/cma.j.issn.1002-0098.2017.06.004.
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021). Stereolithography 3D printing technology in pharmaceuticals: a review. Drug Dev Ind Pharm. 47(9):1362-1372. 10.1080/03639045.2021.1994990.
Doi, Y., & Steinbüchel, A. (2002). Biopolímeros, Aplicações e Produtos Comerciais – Poliésteres III. Wiley-VCH
Farah S, Anderson DG, Langer R. (2016) Physical and mechanical properties of PLA, and their functions in widespread applications - a comprehensive review. Adv Drug Deliv Rev 107:367-392. https://doi.org/10.1016/j.addr.2016.06.012.
He, C., Cao, Y., Ma, C., Liu, X., Hou, F., & Yan, L. (2021) Digital light processing of complex-shaped 3D-zircon (ZrSiO4) ceramic components from a photocurable polysiloxane/ZrO2 slurry. Ceram Int 47:32905–33291. https://doi.org/10.1016/j.ceramint.2021.08.189.
Hong, Li., Kenan, Ma., Yuchun, Sun., & Hu, Chen. (2021). Design parameters of polylactic acid custom trays manufactured by fused deposition modeling for partial edentulism: Consideration of the accuracy of the definitive cast. The Journal of Prosthetic Dentistry, 127(2), 288.e1-288.e11
Horn, T. J., & Harryson, O. L. A. (2012). Visão geral das tecnologias atuais de manufatura aditiva e aplicações selecionadas. ciência Prog. 95, 255–282.
Ilyas, RA., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., & Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., Norrrahim, M. N. F., Abral, H., & Asrofi, M. (2021). Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications. Polymers (Basel). 13(8):1326. 10.3390/polym13081326.
Ishida, Y., Miura, D., & Shinya, A. (2022). Application of fused deposition modeling technology for fabrication jigs of three-point bending test for dental composite resins. J Mech Behav Biomed Mater. 130:105172. 10.1016/j.jmbbm.2022.105172.
Hamad, K., Kaseem, M., Yang H. W., Deri, F., & Ko, Y. G. (2015). Propriedades e aplicações médicas do ácido polilático: uma revisão. Expresso Polim. Deixe, 9, 435 – 455.
Kessler, A., Hickel, R., & Reymus, M. (2020). Impressão 3D em Odontologia—Estado da Arte. Operador Dente. 45, 30–40.
Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., & Ghanavati, S. et al. (2021). 3D and 4D printing in dentistry and maxillofacial surgery: printing techniques, materials, and applications. Acta Biomater 122:26–49. https://doi.org/10.1016/j.actbio.2020.12.044.
Kieschnick, A., Schweiger, J., Edelhoff, D., & Güth, J. F. (2020). Status Präsens 2020: Additive CAD/CAM-Gestützte Fertigungstechnologien im Zahntechnischen Labor.
Kristiawan, R. B., Imaduddin, F., Ariawan, D., & Arifin, Z. (2021). Uma revisão da impressão 3D de modelagem por deposição fundida (FDM): Processamento de filamentos, materiais e parâmetros de impressão. Abra Eng. 2021; 11 :639–649. 10.1515/eng-2021-0063.
Leonardo, R., Roberto, P., Antonio, F., & Alberto, B. (2022). Additive manufacturing of PLA to mimic the thrust force of mandibular bone during drilling. Procedia CIRP, 110, 198-201, https://doi.org/10.1016/j.procir.2022.06.036.
Liu, Y., Di, P., Zhao, Y., Hao, Q., Tian, J., & Cui, H. (2019). Accuracy of multi-implant impressions using 3D-printing custom trays and splinting versus conventional techniques for complete arches. Int J Oral Maxillofac Implants. 34(4):1007–1014. 10.11607/jomi.7049.
Lo Russo, L., Lo Muzio, E., Troiano, G., Salamini, A., Zhurakivska, K., & Guida, L. (2021). Accuracy of trial complete dentures fabricated by using fused deposition modeling 3-dimensional printing: An in vitro study. J Prosthet Dent. S0022-3913(21)00416-9. 10.1016/j.prosdent.2021.07.021.
Marin, E., Boschetoo, F., Zanocco, M., Honma, T., Ahu, W., & Pezzotti, G. (2021). Explorative study on the antibacterial efects of 3D-printed PMMA/nitrides composites. Mat Des 206:109788. https://doi. org/10.1016/j.matdes.2021.109788.
Murariu, M., & Dubois, P. (2016). PLA composites: From production to properties. Adv Drug Deliv Rev. 107:17-46. 10.1016/j.addr.2016.04.003.
Muro-Fraguas, I., Sainz-García, A., Gómez, P.F., López, M., Múgica-Vidal, R., & Sainz-García. (2020). Atmospheric pressure cold plasma anti-bioflm coatings for 3D printed food tools. Innov Food Sci Emerg Technol 64:102404. https://doi.org/10.1016/j.ifset.2020.102404.
Nagata, K., Muromachi, K., Kouzai, Y., Inaba, K., Inoue, E., Fuchigami, K., Nihei, T., Atsumi, M., Kimoto, K., & Kawana, H. (2022). Fit accuracy of resin crown on a dental model fabricated using fused deposition modeling 3D printing and a polylactic acid filament. J Prosthodont Res. 10.2186/jpr.JPR_D_21_00325.
Najeeb, S., Zafar, M. S., Khurshid, Z., & Siddiqui, F. (2016). Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics. J Prosthodont Res 60:12–19. https://doi.org/10.1016/j.jpor. 2015.10.001.
Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hofmann, T. C., & Mulrow, C. D. et al (2021) (2020). The PRISMA 2020 statement: an updated guideline for reporting systematic reviews. BMJ 372(71). https://doi.org/10.1136/bmj.n71.
Panayotov, I.V., Orti, V., Cuisinier, F., & Yachouh, J. (2016). Polyetheretherketone (PEEK) for medical applications. J Mater Sci Mater Med. 27:118.
Papathanasiou, I., Kamposiora, P., Papavasiliou, G., & Ferrari, M. (2020). The use of PEEK in digital prosthodontics: a narrative review. BMC Oral Health 20:217. https://doi.org/10.1186/ s12903-020-01202-7.
Park, M. E., & Shin, S. Y. (2018). Three-dimensional comparative study on the accuracy and reproducibility of dental casts fabricated by 3D printers. J Prosthet Dent 119(5): 861. e1–861.e7.
Park, S. M., Park, J. M., Kim, S. K., Heo, S. J., & Koak, J. Y. (2020). Flexural Strength of 3D-Printing Resin Materials for Provisional Fixed Dental Prostheses. Materials (Basel). 13(18):3970. 10.3390/ma13183970.
Peng, L., Wang, Z. H., Sun, Y. C., Qu, W., Han, Y., & Liang, Y. H. (2018). Computer aided design and three-dimensional printing for apicoectomy guide template. Beijing Da Xue Xue Bao Yi Xue Ban.;50(5):905-910.
Peters, K. (2010). Polymer optical fber sensors-a review. Smart Mater Struct 20(1):013002.
Rebong, R. E., Stewart, K. T., Utreja, A., Ghoneima, A. A. (2018). Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: a comparative study. Angle Orthod 88:363–369. https://doi.org/10.2319/ 071117-460.1 53.
Reverte, J. M., Caminero, M. Á., Chacón, J. M., García-Plaza, E., Núñez, P. J., Becar, J. P. (2020). Mechanical and Geometric Performance of PLA-Based Polymer Composites Processed by the Fused Filament Fabrication Additive Manufacturing Technique. Materials (Basel).13(8):1924. 10.3390/ma13081924.
Singh, S., Singh, G., Prakash, C., Ramakrishna, S. (2020). Current status and future directions of fused flament fabrication. J Manuf Process 55:288–306. https://doi.org/10.1016/j.jmapro.2020.04.049.
Singhvi, M. S., Zinjarde, S. S., Gokhale, D. V. (2019). Polylactic acid: synthesis and biomedical applications. J Appl Microbiol. 127(6):1612-1626. 10.1111/jam.14290.
Su, S., Kopitzky, R., Tolga, S., Kabasci, S. (2019). Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review. Polymers (Basel). 11(7):1193. 10.3390/polym11071193
Tappa, K., Jammalamadaka, U., Weisman, J. A., Ballard, D. H., Wolford, D. D., Pascual-Garrido, C., Wolford, L. M., Woodard, P. K., & Mills, D. K. (2019). 3D Printing Custom Bioactive and Absorbable Surgical Screws, Pins, and Bone Plates for Localized Drug Delivery. J Funct Biomater. 10(2):17. 10.3390/jfb10020017.
Thompson, M. K., Morôni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernardo, A., Schulz, J., Graf, P., & Ahuja, B. (2016). Design para Manufatura Aditiva: Tendências, oportunidades, considerações e restrições. CIRP Ana. 2016, 65, 737-760.
Valerga, A. P., Batista, M., Puyana, R., Sambruno, A., Wendt, C., & Marcos, M. (2017). Estudo preliminar dos efeitos da cor do fio PLA nas características geométricas de peças fabricadas por FDM. Procedia Manuf. 2017; 13 :924–931. 10.1016/j.promfg.2017.09.161.
Van Noort, R. (2012). O futuro dos aparelhos odontológicos é digital. Dente. Mate. 28, 3–12.
Wach, R. A., Wolszczak, P., & Adamus-Wlodarczyk, A. (2018). Melhoria das propriedades mecânicas de peças FDM-PLA via recozimento térmico. Macromol. Mate. Eng. 303(9). 10.1002/mame.201800169.
Ye, H., Wang, Z., Sun, Y., Zhou, & Y. (2020). Fully digital workflow for the design and manufacture of prostheses for maxillectomy defects. J Prosthet Dent. 126(2):257-261. 10.1016/j.prosdent.2020.05.026.
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zao, H., & Cai, Z. et al. (2021). Recent advances in 3D bioprinting of vascularized tissues. Mater Des 199:109398. https://doi.org/10.1016/j.matdes.2020.109398.
Zimmermann, M., Ender, A., Attin, T., & Mehl, A. (2020). Fracture load of three-unit full-contour fixed dental prostheses fabricated with subtractive and additive CAD/CAM technology. Clin Oral Investig. 24(2): 1035–1042.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Heloisa Domingues Lodi ; Murilo Rodrigues de Campos; Andréa Cândido dos Reis
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.