Impact of simplified chemical treatment of semi-direct restorations cemented with self-adhesive resin cement on dentin bond durability and nanoleakage
DOI:
https://doi.org/10.33448/rsd-v9i11.9525Keywords:
Adhesiveness; Resin cements; Dental permanent filling; Dental restoration failure; Longevity.Abstract
The present study aimed to evaluate the impact of different chemical surface treatments and aging on dentin bond strength and nanoleakage of semi-direct restorations cemented with self-adhesive resin cement. One hundred and sixty semi-direct composite restorations (4.8 x 2.8 x 4.0 mm) were produced to fill dentin preparations in bovine tooth, and the specimens were divided into 8 groups according to chemical treatment [No treatment, Silane (S), Scotchbond™ Universal adhesive (SBU), and S+SBU], and aging time in water [24 h and 6 months]. Push-out bond strength (PBS) was measured through a universal testing machine (1.0 mm/min), failure modes by a dissecting microscope, and nanoleakage by scanning electron microscopy. Two-way ANOVA and Tukey's post-hoc (p<0.05) test were used to analyze PBS data, whilst failure modes and nanoleakage were analyzed descriptively. The bond durability was influenced by different chemical surface treatments after 6 months of aging in distilled water, with the best performance for the group that uses silane associated with the universal adhesive. Nanoleakage was greater at the dentin-cement interface, from the base of the restorations. However, the infiltration of silver crystals at the cement-resin interface was not influenced by the different chemical treatments applied. The results of the study suggest that self-adhesive cement promotes efficient adhesion to the interface that improves over time without the need for chemical surface treatment or when using SBU, with or without silane.
References
Alharbi, A., Rocca, G. T., Dietschi, D. & Krejci, I. (2014). Semidirect composite onlay with cavity sealing: a review of clinical procedures. Journal of esthetic and restororative dentistry, 26(2), 97-106. https://doi.org/10.1111/jerd.12067
Almeida, C. M., Meereis, C. T. W., Leal, F.B., Ogliari, A. O., Piva, E. & Ogliari, F. A. (2018). Evaluation of long-term bond strength and selected properties of self-adhesive resin cements. Brazilian oral research, 32, e15. https://doi.org/10.1590/1807-3107bor-2018.vol32.0015
Altinci, P., Mutluayb, M. & Tezvergil-Mutluay, A. (2018). Repair bond strength of nanohybrid composite resins with a universal adhesive. Acta biomaterialia odontologica scandinavica, 4(1), 10–19. https://doi.org/10.1080/23337931.2017.1412262
Bähr, N., Keul, C., Edelhoff, D., Eichberger, M., Roos, M., Gernet, W. & Stawarczyk, B. (2013). Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dental materials journal, 32(3), 492-501. https://doi.org/10.4012/dmj.2012-329
Bandéca, M. C., Tonetto, M. R., Barros, E. D., Pinto, S. C. S., Firoozmand, L. M., Andrade, M. F., Saad, J. R. C., Maia Filho, E. M. & Queiroz, R. C. S. (2012). Indirect resin onlay cemented with self-adhesive resin cement: a comprehensive clinical overview. World journal of dentistry, 3(3), 273-277. https://doi.org/10.5005 / jp-journals-10015-1172
Bulut, N. B., Evlioğlu, G., Röhlig, B .G. & Çelak, T. (2018). Effect of dentin pretreatment on shear bond strength of three resin-based luting cements. European oral research, 52(2), 82–88. https://doi.org/10.26650/eor.2018.449
Chaves, L., Oliveira, S. N., Özcan, M., Acchar, W., Caldas, M., Assunção, I. V., Souza, R., & Borges, B. (2019). Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities. Brazilian dental journal, 30(5), 476–483. https://doi.org/10.1590/0103-6440201902741
Cura, M., González-González, I., Fuentes, V., & Ceballos, L. (2016). Effect of surface treatment and aging on bond strength of composite resin onlays. The journal of prosthetic dentistry, 116(3), 389–396. https://doi.org/10.1016/j.prosdent.2016.02.016
Fahl N., Jr (2015). Direct-Indirect Class V Restorations: A Novel Approach for Treating Noncarious Cervical Lesions. Journal of esthetic and restorative dentistry, 27(5), 267–284. https://doi.org/10.1111/jerd.12151
Godoy, C. E., Brum, R. T. & Higashi, C. (2014). Semi-direct technique for partial reconstructions in posterior teeth - case report. Full dentistry in science, 5 (17), 124-133.
Hooshmand, T., Rostami, G., Behroozibakhsh, M., Fatemi, M., Keshvad, A., & van Noort, R. (2012). Interfacial fracture toughness of different resin cements bonded to a lithium disilicate glass ceramic. Journal of dentistry, 40(2), 139–145. https://doi.org/10.1016/j.jdent.2011.12.005
Kim, J. H., Chae, S. Y., Lee, Y., Han, G. J., & Cho, B. H. (2015). Effects of multipurpose, universal adhesives on resin bonding to zirconia ceramic. Operative dentistry, 40(1), 55–62. https://doi.org/10.2341/13-303-L
Lührs, A. K., Guhr, S., Günay, H., & Geurtsen, W. (2010). Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro. Clinical oral investigations, 14(2), 193–199. https://doi.org/10.1007/s00784-009-0279-z
Matinlinna, J. P., Lung, C., & Tsoi, J. (2018). Silane adhesion mechanism in dental applications and surface treatments: A review. Dental materials, 34(1), 13–28. https://doi.org/10.1016/j.dental.2017.09.002
Papacchini, F., Magni, E., Radovic, I., Mazzitelli, C., Monticellia, F., Goracci, C., Polimeni, A., & Ferrari, M. (2007a). Effect of intermediate agents and pre-heating of repairing resin on composite-repair bonds. Operative dentistry, 32(4), 363–371. https://doi.org/10.2341/06-105
Papacchini, F., Dall'Oca, S., Chieffi, N., Goracci, C., Sadek, F. T., Suh, B. I., Tay, F. R., & Ferrari, M. (2007b). Composite-to-composite microtensile bond strength in the repair of a microfilled hybrid resin: effect of surface treatment and oxygen inhibition. The journal of adhesive dentistry, 9(1), 25–31.
Rho, Y. J., Namgung, C., Jin, B. H., Lim, B. S., & Cho, B. H. (2013). Longevity of direct restorations in stress-bearing posterior cavities: a retrospective study. Operative dentistry, 38(6), 572–582. https://doi.org/10.2341/12-432-C
Rodrigues, R. F., Ramos, C. M., Francisconi, P. A., & Borges, A. F. (2015). The shear bond strength of self-adhesive resin cements to dentin and enamel: an in vitro study. The Journal of prosthetic dentistry, 113(3), 220–227. https://doi.org/10.1016/j.prosdent.2014.08.008
Rodrigues, S. A., Jr, Ferracane, J. L., & Della Bona, A. (2009). Influence of surface treatments on the bond strength of repaired resin composite restorative materials. Dental materials, 25(4), 442–451. https://doi.org/10.1016/j.dental.2008.09.009
Santos, M. J., Bapoo, H., Rizkalla, A. S., & Santos, G. C. (2011). Effect of dentin-cleaning techniques on the shear bond strength of self-adhesive resin luting cement to dentin. Operative dentistry, 36(5), 512–520. https://doi.org/10.2341/10-392-L
Skupien, J. A., Sarkis-Onofre, R., Cenci, M. S., Moraes, R. R., & Pereira-Cenci, T. (2015). A systematic review of factors associated with the retention of glass fiber posts. Brazilian oral research, 29, S1806-83242015000100401. https://doi.org/10.1590/1807-3107BOR-2015.vol29.0074
Sokolowski, G., Szczesio, A., Bociong, K., Kaluzinska, K., Lapinska, B., Sokolowski, J., Domarecka, M., & Lukomska-Szymanska, M. (2018). Dental Resin Cements-The Influence of Water Sorption on Contraction Stress Changes and Hydroscopic Expansion. Materials (Basel, Switzerland), 11(6), 973. https://doi.org/10.3390/ma11060973
Sousa-Lima, R. X., Silva, L., Chaves, L., Geraldeli, S., Alonso, R., & Borges, B. (2017). Extensive Assessment of the Physical, Mechanical, and Adhesion Behavior of a Low-viscosity Bulk Fill Composite and a Traditional Resin Composite in Tooth Cavities. Operative dentistry, 42(5), E159–E166. https://doi.org/10.2341/16-299-L
Turp, V., Sen, D., Tuncelli, B., & Ozcan, M. (2013). Adhesion of 10-MDP containing resin cements to dentin with and without the etch-and-rinse technique. The journal of advanced prosthodontics, 5(3), 226–233. https://doi.org/10.4047/jap.2013.5.3.226
Xie, H., Li, Q., Zhang, F., Lu, Y., Tay, F. R., Qian, M., & Chen, C. (2016). Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better? Dental materials, 32(3), 403–411. https://doi.org/10.1016/j.dental.2015.12.014
Xuan, G. H. & Wang, H. H. (2015). The effect of acid etching on bond strength of different self-adhesive resin cements to dentin. Shanghai Kou Qiang Yi Xue, 24 (3), 302-306.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Joselúcia da Nóbrega Dias; Andressa Eveline de Lima Ribeiro; Ana Margarida dos Santos Melo; Boniek Castillo Dutra Borges; Isauremi Assunção
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
