Respiratory protection: scanning electron microscopy study of mask filters
DOI:
https://doi.org/10.33448/rsd-v11i5.27047Keywords:
Respiratory Protective Devices; Personal Protective Equipment; N95 Respirators; Occupational Exposure; Occupational health.Abstract
Objective: to analyze, through scanning electron microscopy, the morphology of filters in N95/PFF2 masks with and without activated carbon. Method: analytical study, carried out at the Laboratory of Electronic Microscopy and Microanalysis of a university located in northern Paraná. To compose the samples, masks from known brands that were available at the university hospital at the time of the study were acquired: PFF2 mask with activated charcoal, PFF2/equivalent N95 mask. In the laboratory, the samples were prepared and evaluated in the Scanning Electron Microscopy device. Results: All masks had four layers of synthetic polypropylene fibers. The difference presented is in the size of the fibers, the fibers in the filtering layer have from 1 to 5mm and the fibers in the structural layers measure from 15 to 20mm. It was possible to observe openings in the meshes of the filtering layer, with variations between the masks. Conclusion: it is possible to analyze the morphology of the filters of the N95/PFF2 masks, through the analysis of size, distribution and conformation of the fibers, the results indicate that workers who use a high-efficiency mask type N95/PFF2, with activated carbon, during daily exposure to surgical smoke, it decreases the inhalation of particulate materials that are harmful to health in the long term.
References
Fiocruz. (2021). Proteção Respiratória. http://www.fiocruz.br/biosseguranca/bis/virtual%20tour/hipertextos/up1/respiradores.html
Ragde, S. F.; Jorgensen, R. B. & Foreland, S. (2016). Characterizationa of esposure to ultrafine particles from surgical smoke by use of a fast mobility particle sizer. Ann Occup Hyg. 60(7), 860-74.
Neupane, B. B.; Mainali, S.; Sharma, A. & Giri, B. (2019). Optical microscopic stud of surface morphology and filtering efficiency of face masks. Peer J. 26(7), e7142.
Karsai, S. & Däschlein, G. (2012). “Smoking guns”: hazards generated by laser and electrocautery smoke. J Dtsch Dermatol Ges. 10(9), 633-6.
Aorn .(2021). Management of surgical smoke. https://www.aorn.org/guidelines/clinical-resources/tool-kits/non-member-tool-kits/management-of-surgical-smoke-tool-kit-nonmembers
Georgesen, C. & Lipner, S. R. (2018). Surgical smoke: risk assessment and mitigation strategies. J Am Acad Dermatol. 79(4), 746-55.
Wambier, C. G.; Lee, K. C.; Oliveira, P. B.; Wambier, S. P .F. & Beltrame, F. L. (2019). Comment on “Surgical smoke: risk assessment and mitigation strategies” and chemical adsorption by activated carbon N95 masks. J Am Acad Dermatol. 80(4), e79-e80.
Polit, F. D. & Beck, C. T. (2019). Fundamentos de Pesquisa em Enfermagem: Avaliação de evidências para a prática da enfermagem. Porto Alegre: Artmed.
Bree, K.; Barnhill, S. & Rundell, W. (2017). The dangers of electrosurgical smoke to operating room personnel: a review. Workplace Health Saf. 65(11), 517-26.
Limchantra, I. V.; Fong, Y. & Melstrom, K. A. (2019). Surgical smoke exposure in operating room personnel: a review. JAMA Surg. 154(10), 960-67.
Alp, E.; Bijl, D.; Bleichorodt, R. P.; Hansson, B. & Voss, A. (2006). Surgical smoke and infection control. J Hosp Infect. 62(1), 1-5.
Rozzi, T.; Snyder, J. & Novak, D. (2012). Pilot study of aromatic hydrocarbon adsorption characteristics of disposable filtering facepiece respirators that contain activated carbon. J Occup Environ Hyg. 9(11), 624-9.
Spruce L. (2018). Back to basics: protection from surgical smoke. Aorn J. 108(1), 24-32.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Helenize Ferreira Lima Leachi; Aryane Apolinario BieniekI; Tiago Severo Peixe; Renata Perfeito Ribeiro
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1) Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2) Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3) Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
